etckeeper/openzwave/aeotec/zw075.xml

<Product Revision="4" xmlns="https://github.com/OpenZWave/open-zwave">
  <MetaData>
    <MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/0086:004B:0003</MetaDataItem>
    <MetaDataItem name="ProductPic">images/aeotec/zw075.png</MetaDataItem>
    <MetaDataItem id="004B" name="ZWProductPage" type="0003">https://products.z-wavealliance.org/products/1045/</MetaDataItem>
    <MetaDataItem name="WakeupDescription">N/A</MetaDataItem>
    <MetaDataItem name="ExclusionDescription">Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing.</MetaDataItem>
    <MetaDataItem id="004B" name="FrequencyName" type="0003">CEPT (Europe)</MetaDataItem>
    <MetaDataItem name="Name">Smart Switch Gen5</MetaDataItem>
    <MetaDataItem name="ResetDescription">Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable.</MetaDataItem>
    <MetaDataItem name="Description">Aeon Labs Smart Switch Gen5 is a Z-Wave device that can report the wattage energy usage and KWH usage to a Z-Wave Controller (especially a gateway), it can be controlled by other Z-Wave devices to turn on/off loads, it can bear up to 16A current of resistive loads. It also acts as a repeater that forwards Z-Wave command messages to destination nodes if the originating controller is out of range from the destination node.
By taking advantage of the Z-Wave mesh network, commands can be routed to their destination via intermediary “listening” Z-Wave products. Products that are Z-Wave certified can be used and communicate with other Z-Wave certified devices.
Also a tool that can be programmed, scheduled, controlled and communicated with from anywhere in the world.
</MetaDataItem>
    <MetaDataItem name="InclusionDescription">Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing.</MetaDataItem>
    <MetaDataItem id="004B" name="Identifier" type="0003">ZW075-C16</MetaDataItem>
    <MetaDataItem name="ProductManual">https://Products.Z-WaveAlliance.org/ProductManual/File?folder=&amp;filename=Manuals/1056/Aeon Labs Smart Switch Gen5_Update 2.pdf</MetaDataItem>
    <ChangeLog>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="03 May 2019" revision="2">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1045/xml</Entry>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="03 May 2019" revision="3">Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1053/xml</Entry>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="03 May 2019" revision="4">Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1056/xml</Entry>
    </ChangeLog>
    <MetaDataItem id="004B" name="ZWProductPage" type="0103">https://products.z-wavealliance.org/products/1053/</MetaDataItem>
    <MetaDataItem id="004B" name="Identifier" type="0103">ZW075-A02</MetaDataItem>
    <MetaDataItem id="004B" name="FrequencyName" type="0103">U.S. / Canada / Mexico</MetaDataItem>
    <MetaDataItem id="004B" name="ZWProductPage" type="0203">https://products.z-wavealliance.org/products/1056/</MetaDataItem>
    <MetaDataItem id="004B" name="FrequencyName" type="0203">Australia / New Zealand</MetaDataItem>
    <MetaDataItem id="004B" name="Identifier" type="0203">ZW075-B09</MetaDataItem>
  </MetaData>
  <!-- Aeon Labs Smart Switch Gen5 -->
  <!--Source: http://ozw.my-ho.st/Aeon/Engineering%20Spec%20-%20Aeon%20Labs%20Smart%20Switch%20Gen5_V3.25.pdf-->
  <Protocol refreshonnodeinfoframe="false"/>
  <!-- Configuration Parameters -->
  <CommandClass id="112">
    <Value genre="config" index="2" label="Blinking behavior" max="65535" min="257" size="2" type="short" units="" value="3850">
      <Help>
      Configuration Value 1: 1-255
      Configuration Value 1  is to Specify the time that Smart Switch need blink, The unit is Second;
      Configuration Value 2: 1-255
      Configuration Value 2  is to Specify the Cycle of on/off, the unit of it is 0.1 second.
      </Help>
    </Value>
    <Value genre="config" index="3" label="Current Overload Protection" max="1" min="0" size="1" type="list" units="" value="0">
      <Help>Load will be closed when the Current overruns (EU 16.2A) for more than 2 minutes</Help>
      <Item label="Deactivate Overload Protection (Default)" value="0"/>
      <Item label="Active Overload Protection" value="1"/>
    </Value>
    <Value genre="config" index="20" label="Output Load Status" max="2" min="0" size="1" type="list" units="" value="0">
      <Help>Configure the output load status after re-power on.</Help>
      <Item label="Last status (Default)" value="0"/>
      <Item label="Always on" value="1"/>
      <Item label="Always off" value="2"/>
    </Value>
    <Value genre="config" index="80" label="Notification status" max="2" min="0" size="1" type="list" units="" value="0">
      <Help>Defines the automated status notification of an associated device when status changes</Help>
      <Item label="Nothing" value="0"/>
      <Item label="Hail" value="1"/>
      <Item label="Basic" value="2"/>
    </Value>
    <Value genre="config" index="81" label="Configure the state of the LED" max="1" min="0" size="1" type="list" units="" value="0">
      <Item label="The LED will follow the status (on/off) of its load. (Default)" value="0"/>
      <Item label="When the state of the Switch changes, the LED will follow the status (on/off) of its load, but the LED will turn off after 5 seconds." value="1"/>
    </Value>
    <Value genre="config" index="90" label="Enables/disables parameter 91/92" type="bool" units="" value="0">
      <Help>Enable/disable Wattage threshold and percent.</Help>
    </Value>
    <Value genre="config" index="91" label="Minimum Change to send Report (Watt)" max="32000" min="0" size="2" type="short" units="watts" value="25">
      <Help>The value represents the minimum change in wattage for a Report to be sent (default 25 W)</Help>
    </Value>
    <Value genre="config" index="92" label="Minimum Change to send Report (%)" max="100" min="0" type="byte" units="%" value="5">
      <Help>The value represents the minimum percentage change in wattage for a Report to be sent (Default 5)</Help>
    </Value>
    <Value affects="101,102,103" genre="config" index="100" label="Default Group Reports" type="button" units="" write_only="true">
      <Help>Set report types for groups 1, 2 and 3 to default.</Help>
    </Value>
    <Value genre="config" index="101" label="Report type sent in Reporting Group 1" type="int" units="" value="4">
      <Help>
          Defines the type of report sent for reporting group 1.
          1 is meter report for voltage.
          2 is meter report for current.
          4 is meter report for watts.
          8 is meter report for kilowatts.
	 Value 1 (msb) Reserved
	 Value 2 Reserved
	 Value 3 Reserved
	 Value 4 (lsb) bits 7-4 reserved
          bit 3 kWh
          bit 2 watt
          bit 1 current
          bit 0 voltage
      </Help>
    </Value>
    <Value genre="config" index="102" label="Report type sent in Reporting Group 2" type="int" units="" value="8">
      <Help>
          Defines the type of report sent for reporting group 2.
          1 is meter report for voltage.
          2 is meter report for current.
          4 is meter report for watts.
          8 is meter report for kilowatts.
	 Value 1 (msb) Reserved
	 Value 2 Reserved
	 Value 3 Reserved
	 Value 4 (lsb) bits 7-4 reserved
          bit 3 kWh
          bit 2 watt
          bit 1 current
          bit 0 voltage
      </Help>
    </Value>
    <Value genre="config" index="103" label="Report type sent in Reporting Group 3" type="int" units="" value="0">
      <Help>
          Defines the type of report sent for reporting group 3.
          1 is meter report for voltage.
          2 is meter report for current.
          4 is meter report for watts.
          8 is meter report for kilowatts.
	 Value 1 (msb) Reserved
	 Value 2 Reserved
	 Value 3 Reserved
	 Value 4 (lsb) bits 7-4 reserved
          bit 3 kWh
          bit 2 watt
          bit 1 current
          bit 0 voltage
      </Help>
    </Value>
    <Value affects="111,112,113" genre="config" index="110" label="Set 111-113 to default" type="button" units="" value="0" write_only="true">
      <Help>Set time interval for sending reports for groups 1, 2 and 3 to default.</Help>
    </Value>
    <Value genre="config" index="111" label="Send Interval for Reporting Group 1" max="65535" min="0" type="int" units="seconds" value="600">
      <Help>Defines the time interval when the defined report for group 1 is sent.</Help>
    </Value>
    <Value genre="config" index="112" label="Send Interval for Reporting Group 2" max="65535" min="0" type="int" units="seconds" value="600">
      <Help>Defines the time interval when the defined report for group 2 is sent.</Help>
    </Value>
    <Value genre="config" index="113" label="Send Interval for Reporting Group 3" max="65535" min="0" type="int" units="seconds" value="600">
      <Help>Defines the time interval when the defined report for group 3 is sent.</Help>
    </Value>
    <Value genre="config" index="200" label="Partner ID" max="1" min="0" size="1" type="list" units="" value="0">
      <Help>Partner ID</Help>
      <Item label="Aeon Labs Standard (Default)" value="0"/>
      <Item label="AT&amp;T" value="1"/>
    </Value>
    <Value genre="config" index="252" label="Configuration Locked" max="1" min="0" size="1" type="list" units="" value="0">
      <Help>Enable/disable Configuration Locked</Help>
      <Item label="Disable" value="0"/>
      <Item label="Enable" value="1"/>
    </Value>
    <Value genre="config" index="254" label="Device tag" max="65535" min="0" type="short" units="" value="0">
      <Help>Device tag.</Help>
    </Value>
    <Value genre="config" index="255" label="Reset device" type="button" units="" write_only="true">
      <Help>Reset to the default configuration.</Help>
    </Value>
  </CommandClass>
  <!-- Association Groups -->
  <CommandClass id="133">
    <Associations num_groups="2">
      <Group index="1" label="LifeLine" max_associations="5"/>
      <Group index="2" label="Retransmit Switch CC" max_associations="5"/>
    </Associations>
  </CommandClass>
</Product>