etckeeper/openzwave/aeotec/zw074.xml

<!-- Aeon Labs Multi Sensor --><Product Revision="5" xmlns="https://github.com/OpenZWave/open-zwave">
  <MetaData>
    <MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/0086:004A:0102</MetaDataItem>
    <MetaDataItem name="ProductPic">images/aeotec/zw074.png</MetaDataItem>
    <MetaDataItem id="004A" name="ZWProductPage" type="0102">https://products.z-wavealliance.org/products/1163/</MetaDataItem>
    <MetaDataItem name="Description">The  Aeotec  by  Aeon  Labs  MultiSensor  Gen5  looks  like a motion sensor and it  acts like one too.  But it’s also so much more. Installing this 1 piece of Z-Wave technology is  the same as installing 4  pieces of  Z-Wave  technology.  Your home control network will immediately understand motion, temperature, humidity and light readings wherever Multisensor installed. Those intelligent readings will equate to intelligence  automation. And intelligent automation will give you the perfect, smart home.</MetaDataItem>
    <MetaDataItem id="004A" name="Identifier" type="0102">ZW074-A</MetaDataItem>
    <MetaDataItem name="ExclusionDescription">Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Z-Wave button that you can find in back of the product.</MetaDataItem>
    <MetaDataItem name="ProductManual">https://Products.Z-WaveAlliance.org/ProductManual/File?folder=&amp;filename=Manuals/1170/Instructions - MultiSensor Gen5 MCert1.pdf</MetaDataItem>
    <MetaDataItem name="Name">MultiSensor Gen5</MetaDataItem>
    <MetaDataItem name="ResetDescription">Press and hold the Z-Wave button that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable.</MetaDataItem>
    <MetaDataItem name="InclusionDescription">Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Z-Wave button that you can find in the back of the product.</MetaDataItem>
    <MetaDataItem name="WakeupDescription">Press and hold the Z-Wave button for 3 seconds will trigger sending the Wake up notification command. If press the Z-Wave button 3 times, the MultiSensor will wake up for 10 minutes.</MetaDataItem>
    <MetaDataItem id="004A" name="FrequencyName" type="0102">U.S. / Canada / Mexico</MetaDataItem>
    <ChangeLog>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="08 May 2019" revision="3">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1163/xml</Entry>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="08 May 2019" revision="4">Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1169/xml</Entry>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="08 May 2019" revision="5">Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1170/xml</Entry>
    </ChangeLog>
    <MetaDataItem id="004A" name="ZWProductPage" type="0202">https://products.z-wavealliance.org/products/1169/</MetaDataItem>
    <MetaDataItem id="004A" name="Identifier" type="0202">ZW074-B</MetaDataItem>
    <MetaDataItem id="004A" name="FrequencyName" type="0202">Australia / New Zealand</MetaDataItem>
    <MetaDataItem id="004A" name="ZWProductPage" type="0002">https://products.z-wavealliance.org/products/1170/</MetaDataItem>
    <MetaDataItem id="004A" name="Identifier" type="0002">ZW074-C</MetaDataItem>
    <MetaDataItem id="004A" name="FrequencyName" type="0002">CEPT (Europe)</MetaDataItem>
  </MetaData>
  <!-- Configuration Parameters -->
  <CommandClass id="112">
    <Value genre="config" index="2" label="Wake up 10 minutes on Power On" max="1" min="0" size="1" type="list" value="0">
      <Help>Stay awake for 10 minutes after batteries are inserted</Help>
      <Item label="No" value="0"/>
      <Item label="Yes" value="1"/>
    </Value>
    <Value genre="config" index="3" label="On time" max="15300" min="1" type="short" units="seconds" value="240">
      <Help>How long should the device associated to multi sensor keep state On before sending it Off command (if the value is bigger than 255, the value would be rounded to next integer in minutes)</Help>
    </Value>
    <Value genre="config" index="4" label="Enable Motion Sensor" max="1" min="0" size="1" type="list" value="1">
      <Help>Enable Motion Sensor</Help>
      <Item label="Disabled" value="0"/>
      <Item label="Enabled" value="1"/>
    </Value>
    <Value genre="config" index="5" label="Command Options" max="2" min="1" size="1" type="list" value="1">
      <Help>Which commands to send when PIR motion sensor triggered
			OZW Ideal Value is Binary Sensor Report</Help>
      <Item label="Basic Set (default) " value="1"/>
      <Item label="Binary Sensor Report" value="2"/>
    </Value>
    <Value genre="config" index="40" label="Reporting Threshold" max="1" min="0" size="1" type="list" value="0">
      <Help>Enable/disable the selective reporting only when measurements reach a certain threshold or percentage 
			set in the threshold settings.  This is used to reduce network
			traffic.</Help>
      <Item label="Disabled" value="0"/>
      <Item label="Enabled" value="1"/>
    </Value>
    <Value genre="config" index="41" label="Temperature Reporting Threshold" max="39321" min="0" size="2" type="short" units="%" value="256">
      <Help>Threshold change in temperature to induce an automatic report.  
			Note: 
			1. When the unit is Celsius, threshold=Value. 
			2. When the unit is Fahrenheit, threshold=Value*1.8. The accuracy is 0.1. 
			3. The high byte is the part of integer, the low byte is the fractional part. 
			</Help>
    </Value>
    <Value genre="config" index="42" label="Humidity Reporting Threshold" max="39321" min="0" size="2" type="short" units="%" value="1280">
      <Help>Threshold change in humidity to induce an automatic report. 
			Note: 
			The accuracy is 0.1. 
			The high byte is the part of integer, the low byte is the fractional part. 
			</Help>
    </Value>
    <Value genre="config" index="43" label="Luminance Reporting Threshold" max="65535" min="0" size="2" type="short" units="LUX" value="25600">
      <Help>Threshold change in luminance to induce an automatic report. </Help>
    </Value>
    <Value genre="config" index="44" label="Battery Reporting Threshold" max="39321" min="0" size="2" type="short" units="%" value="1280">
      <Help>Threshold change in battery level to induce an  automatic report. 
			Note: 
			The accuracy is 0.1. 
			The high byte is the part of integer, the low byte is the fractional part.  
			</Help>
    </Value>
    <Value genre="config" index="46" label="Low Temp Alarm" max="1" min="0" size="1" type="list" value="0">
      <Help>Enable/disable to send the alarm report of low temperature(Less than 15 Degress C)
			</Help>
      <Item label="Disabled" value="0"/>
      <Item label="Enabled" value="1"/>
    </Value>
    <Value genre="config" index="101" label="Group 1 Reports" type="int" value="255">
      <Help>Which reports need to send automatically in timing intervals for group 1. Bitsets: 0 -> Battery report, 5 -> Temperature, 6 -> Humidity, 7 -> Luminosity</Help>
    </Value>
    <Value genre="config" index="102" label="Group 2 Reports" type="int" value="0">
      <Help>Which reports need to send automatically in timing intervals for group 2. Bitsets: 0 -> Battery report, 5 -> Temperature, 6 -> Humidity, 7 -> Luminosity</Help>
    </Value>
    <Value genre="config" index="103" label="Group 3 Reports" type="int" value="0">
      <Help>Which reports need to send automatically in timing intervals for group 3. Bitsets: 0 -> Battery report, 5 -> Temperature, 6 -> Humidity, 7 -> Luminosity</Help>
    </Value>
    <Value genre="config" index="111" label="Group 1 Interval" max="2678400" min="1" type="int" units="seconds" value="1800">
      <Help>The interval of sending report group 1. 1 to 2678400 seconds</Help>
    </Value>
    <Value genre="config" index="112" label="Group 2 Interval" max="2678400" min="1" type="int" units="seconds" value="1800">
      <Help>The interval of sending report group 2. 1 to 2678400 seconds</Help>
    </Value>
    <Value genre="config" index="113" label="Group 3 Interval" max="2678400" min="1" type="int" units="seconds" value="1800">
      <Help>The interval of sending report group 3. 1 to 2678400 seconds</Help>
    </Value>
    <Value genre="config" index="252" label="Enable/disable Lock Configuration" max="1" min="0" size="1" type="list" units="" value="0">
      <Help>
				Enable/disable Lock Configuration
			</Help>
      <Item label="Disable" value="0"/>
      <Item label="Enable" value="1"/>
    </Value>
    <Value genre="config" index="255" label="Reset to default" type="button" value="0" write_only="true">
      <Help>Reset to factory defaults.</Help>
    </Value>
  </CommandClass>
  <!-- the Device Doesn't support Get for Alarm Class -->
  <CommandClass id="113">
    <Compatibility>
      <GetSupported>false</GetSupported>
    </Compatibility>
  </CommandClass>
  <!-- Association Groups -->
  <CommandClass id="133">
    <Associations num_groups="1">
      <Group index="1" label="LifeLine" max_associations="5"/>
    </Associations>
  </CommandClass>
</Product>