esphome:
  name: ds220-lcd-panel
  friendly_name: DS220+ LCD Panel
        
esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: esp-idf
  variant: esp32s3

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "eVupNko2fMCA58CbMcMY6cACQHVi8VZbMLYX7A5z/r4="

ota:
  - platform: esphome
    password: "916dad427f4df26e1fb4d6cd96a5b9bc"

wifi:
  ssid: "REALM_NETWORK"
  password: "EineAlteDummeGanzHatEier"

  manual_ip:
    static_ip: 192.168.0.109
    gateway: 192.168.0.1
    subnet: 255.255.255.0

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Esp32-S3-Lcd Fallback Hotspot"
    password: "H4OqsZnugvps"

captive_portal:

time:
  - platform: sntp
    id: sntp_time

# HTTPS-Client für DSM-API
http_request:
  useragent: esphome/ds220-panel
  timeout: 10s
  verify_ssl: false   # bei selbstsigniertem DSM-Zertifikat; mit gültigem Zertifikat auf true

# --------- Display (Waveshare ESP32-S3-LCD-1.47 / ST7789 172x320) ----------
spi:
  clk_pin: GPIO40
  mosi_pin: GPIO45

display:
  - platform: st7789v
    model: "Waveshare 1.47in 172X320"
    cs_pin: GPIO42
    dc_pin: GPIO41
    reset_pin: GPIO39
    backlight_pin: GPIO48
    rotation: 180
    id: lcd
    lambda: |-
      it.printf(4, 4, id(f16b), COLOR_CYAN, "Synology DS220+");
      if (id(sntp_time).now().is_valid()) {
        it.strftime(4, 26, id(f12), COLOR_SILVER, "%d.%m. %H:%M:%S", id(sntp_time).now());
      }
      it.printf(4, 52, id(f12), COLOR_SILVER, "Quelle: Home Assistant");

      it.printf(4, 84,  id(f14), COLOR_WHITE, "CPU: %5.1f %%", id(cpu_total).state);
      it.printf(4, 106, id(f14), COLOR_WHITE, "RAM: %5.1f %%", id(mem_used).state);
      it.printf(4, 128, id(f14), COLOR_WHITE, "Vol1: %5.1f %%", id(volume1_used).state);

      if (!isnan(id(sys_temp).state)) {
        it.printf(4, 150, id(f14), COLOR_WHITE, "Temp: %4.1f °C", id(sys_temp).state);
      }

# Fonts
font:
  - file: "gfonts://Roboto Mono"
    id: f12
    size: 12
  - file: "gfonts://Roboto Mono"
    id: f14
    size: 14
  - file: "gfonts://Roboto Mono"
    id: f16b
    size: 16
    glyphs: " !\"%()+=,-_.:°0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzÄÖÜäöüß"

color:
  - id: COLOR_CYAN
    red:   0.0000
    green: 1.0000
    blue:  1.0000
    white: 0.0000
  - id: COLOR_SILVER
    red:   0.7529
    green: 0.7529
    blue:  0.7529
    white: 0.0000
  - id: COLOR_WHITE
    red:   1.0000
    green: 1.0000
    blue:  1.0000
    white: 0.0000
  - id: COLOR_RED
    red:   1.0000
    green: 0.0000
    blue:  0.0000
    white: 0.0000
  - id: COLOR_GREEN
    red:   0.0000
    green: 0.5020
    blue:  0.0000
    white: 0.0000

# -------- Daten aus HA importieren (ESPHome liest HA-States) --------
sensor:
  - platform: homeassistant
    id: cpu_total
    entity_id: sensor.realmdrive_cpu_utilization_total
    unit_of_measurement: "%"
    accuracy_decimals: 1

  - platform: homeassistant
    id: mem_used
    entity_id: sensor.realmdrive_memory_usage_real
    unit_of_measurement: "%"
    accuracy_decimals: 1

  - platform: homeassistant
    id: volume1_used
    entity_id: sensor.realmdrive_volume_1_volume_used
    unit_of_measurement: "%"
    accuracy_decimals: 1

  - platform: homeassistant
    id: sys_temp
    entity_id: sensor.realmdrive_temperature
    unit_of_measurement: "°C"
    accuracy_decimals: 1