etckeeper/openzwave/aeotec/zw078.xml

<!--
Aeotec ZW078 Heavy Duty Smart Switch Gen5
https://aeotec.freshdesk.com/helpdesk/attachments/6009584699
--><Product Revision="5" xmlns="https://github.com/OpenZWave/open-zwave">
  <MetaData>
    <MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/0086:004E:0103</MetaDataItem>
    <MetaDataItem name="ProductPic">images/aeotec/zw078.png</MetaDataItem>
    <MetaDataItem id="004E" name="ZWProductPage" type="0103">https://products.z-wavealliance.org/products/1133/</MetaDataItem>
    <MetaDataItem name="ResetDescription">Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable.</MetaDataItem>
    <MetaDataItem name="WakeupDescription">N/A</MetaDataItem>
    <MetaDataItem name="ExclusionDescription">Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing.</MetaDataItem>
    <MetaDataItem name="ProductManual">https://Products.Z-WaveAlliance.org/ProductManual/File?folder=&amp;filename=Manuals/1142/Heavy Duty Smart Switch Gen5 Manual.pdf</MetaDataItem>
    <MetaDataItem name="Description">Aeon Labs Heavy Duty Smart Switch is a Z-Wave device that can report the wattage energy usage and KWH usage to a Z-Wave Controller (especially a gateway), it can be controlled by other Z-Wave devices to turn on/off loads, it can bear up to 40A current of resister loads. It also acts as a repeater that forward Z-Wave command messages to destination nodes if the originating controller is out of range from the destination node.
By taking advantage of the Z-Wave mesh network, commands can be routed to their destination via intermediary “listening” Z-Wave products. Products that are Z-Wave certified can be used and communicate with other Z-Wave certified devices.

</MetaDataItem>
    <MetaDataItem name="Name">Heavy Duty Smart Switch Gen5</MetaDataItem>
    <MetaDataItem id="004E" name="Identifier" type="0103">ZW078-A</MetaDataItem>
    <MetaDataItem id="004E" name="FrequencyName" type="0103">U.S. / Canada / Mexico</MetaDataItem>
    <MetaDataItem name="InclusionDescription">Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing.</MetaDataItem>
    <ChangeLog>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="03 May 2019" revision="2">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/998/xml</Entry>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="03 May 2019" revision="3">Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1089/xml</Entry>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="08 May 2019" revision="4">Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1133/xml</Entry>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="08 May 2019" revision="5">Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1142/xml</Entry>
    </ChangeLog>
    <MetaDataItem id="004E" name="ZWProductPage" type="0203">https://products.z-wavealliance.org/products/1089/</MetaDataItem>
    <MetaDataItem id="004E" name="Identifier" type="0203">ZW078-B</MetaDataItem>
    <MetaDataItem id="004E" name="FrequencyName" type="0203">Australia / New Zealand</MetaDataItem>
    <MetaDataItem id="004E" name="ZWProductPage" type="0003">https://products.z-wavealliance.org/products/1142/</MetaDataItem>
    <MetaDataItem id="004E" name="FrequencyName" type="0003">CEPT (Europe)</MetaDataItem>
    <MetaDataItem id="004E" name="Identifier" type="0003">ZW078-C</MetaDataItem>
  </MetaData>
  <Protocol refreshonnodeinfoframe="false"/>
  <!-- Configuration Parameters -->
  <CommandClass id="112">
    <Value genre="config" index="3" label="Current Overload Protection" size="1" type="list" value="0">
      <Help>
      Current Overload Protection. Load will be closed when
      the Current more than 39.5A and the time more than 5
      seconds
      </Help>
      <Item label="Disable" value="0"/>
      <Item label="Enable" value="1"/>
    </Value>
    <Value genre="config" index="20" label="LED Mode" size="1" type="list" value="0">
      <Help>LED status after power on</Help>
      <Item label="Last Status" value="0"/>
      <Item label="On" value="1"/>
      <Item label="Off" value="2"/>
    </Value>
    <Value genre="config" index="80" label="Notification status" size="1" type="list" units="" value="0">
      <Help>
	Enables automatic notifications to associated devices whenever there is a state change.
      </Help>
      <Item label="None" value="0"/>
      <Item label="Hail" value="1"/>
      <Item label="Basic" value="2"/>
    </Value>
    <Value genre="config" index="90" label="Enable Wattage Reports" type="bool" units="" value="1">
      <Help>Enable/disable Wattage threshold and percent.</Help>
    </Value>
    <Value genre="config" index="91" label="Wattage threshold" max="32000" min="0" type="short" units="watts" value="50">
      <Help>The minimum change in wattage for a report to be sent.</Help>
    </Value>
    <Value genre="config" index="92" label="Wattage threshold percent" max="99" min="0" type="byte" units="%" value="10">
      <Help>Minimum change in percent of wattage to send a report.</Help>
    </Value>
    <Value affects="101,102,103" genre="config" index="100" label="Default Group Reports" type="button" units="" value="0" write_only="true">
      <Help>Set report types for groups 1, 2 and 3 to default.</Help>
    </Value>
    <Value genre="config" index="101" label="Report type sent in Reporting Group 1" type="int" units="" value="4">
      <Help>
          Defines the type of report sent for reporting group 1.
          1 is meter report for voltage.
          2 is meter report for current.
          4 is meter report for watts.
          8 is meter report for kilowatts.
	 Value 1 (msb) Reserved
	 Value 2 Reserved
	 Value 3 Reserved
	 Value 4 (lsb) bits 7-4 reserved
          bit 3 kWh
          bit 2 watt
          bit 1 current
          bit 0 voltage
      </Help>
    </Value>
    <Value genre="config" index="102" label="Report type sent in Reporting Group 2" type="int" units="" value="8">
      <Help>
          Defines the type of report sent for reporting group 2.
          1 is meter report for voltage.
          2 is meter report for current.
          4 is meter report for watts.
          8 is meter report for kilowatts.
	 Value 1 (msb) Reserved
	 Value 2 Reserved
	 Value 3 Reserved
	 Value 4 (lsb) bits 7-4 reserved
          bit 3 kWh
          bit 2 watt
          bit 1 current
          bit 0 voltage
      </Help>
    </Value>
    <Value genre="config" index="103" label="Report type sent in Reporting Group 3" type="int" units="" value="0">
      <Help>
          Defines the type of report sent for reporting group 3.
          1 is meter report for voltage.
          2 is meter report for current.
          4 is meter report for watts.
          8 is meter report for kilowatts.
	 Value 1 (msb) Reserved
	 Value 2 Reserved
	 Value 3 Reserved
	 Value 4 (lsb) bits 7-4 reserved
          bit 3 kWh
          bit 2 watt
          bit 1 current
          bit 0 voltage
      </Help>
    </Value>
    <Value affects="111,112,113" genre="config" index="110" label="Default Group Time" type="button" units="" value="0" write_only="true">
      <Help>Set time interval for sending reports for groups 1, 2 and 3 to default.</Help>
    </Value>
    <Value genre="config" index="111" label="Send interval G1" max="65535" min="0" type="int" units="seconds" value="5">
      <Help>Defines the time interval when the defined report for group 1 is sent.</Help>
    </Value>
    <Value genre="config" index="112" label="Send interval G2" max="65535" min="0" type="int" units="seconds" value="120">
      <Help>Defines the time interval when the defined report for group 2 is sent.</Help>
    </Value>
    <Value genre="config" index="113" label="Send interval G3" max="65535" min="0" type="int" units="seconds" value="120">
      <Help>Defines the time interval when the defined report for group 3 is sent.</Help>
    </Value>
    <Value genre="config" index="200" label="Partner ID" max="1" min="0" size="1" type="list" units="" value="0">
      <Item label="Aeon Labs Standard Product" value="0"/>
      <Item label="Other" value="1"/>
    </Value>
    <Value genre="config" index="252" label="Lock/Unlock Configuration" max="1" min="0" size="1" type="list" value="0">
      <Help>Lock/ unlock all configuration parameters</Help>
      <Item label="Unlock" value="0"/>
      <Item label="Lock" value="1"/>
    </Value>
    <Value genre="config" index="255" label="Reset To Factory Defaults" size="4" type="list" value="1" write_only="true">
      <Help>Reset to factory defaults</Help>
      <Item label="Reset to factory default setting" value="0"/>
      <Item label="Normal" value="1"/>
      <Item label="Reset to factory default setting and removed from the z-wave network" value="1431655765"/>
    </Value>
  </CommandClass>
  <!-- Association Groups -->
  <CommandClass id="133">
    <Associations num_groups="2">
      <Group index="1" label="LifeLine" max_associations="5"/>
      <Group index="2" label="Retransmit Switch CC" max_associations="5"/>
    </Associations>
  </CommandClass>
</Product>