etckeeper/openzwave/popp/009402.xml

<Product Revision="4" xmlns="https://github.com/OpenZWave/open-zwave">
  <MetaData>
    <MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/0154:0004:0004</MetaDataItem>
    <MetaDataItem name="ProductPic">images/popp/009402.png</MetaDataItem>
    <MetaDataItem id="0004" name="ZWProductPage" type="0004">https://products.z-wavealliance.org/products/2078/</MetaDataItem>
    <MetaDataItem name="Description">This products consists of a standard high-quality photo electric Smoke detector with a pluggable Z-Wave wireless interface module. The Smoke detector will also work as a stand alone product and is certified as '10 year Smoke Detector' The
smoke chamber of the detector has a stainless steel reel with antistatic plastic chamber.
A button allows on-device test of smoke chamber, electronics and battery. The device also offers a built-in self test and
an electronic smoke chamber test to avoid the use of test aerosol. A low battery warning will last for 30 days but full
function of the detector is guaranteed during this time.
The Z-Wave module allows to report the smoke and low battery alarm wirelessly to a central controller. The detector can
also be used as a wireless siren for alarm system or other applications.  </MetaDataItem>
    <MetaDataItem name="ResetDescription">To reset the device keep the button pushed for 10 seconds. After 5 seconds the led starts flashing and after another 5
seconds there is a short beep signaling the successful reset back to factory defaults. Use this procedure only when the network primary controller is missing or otherwise inoperable.</MetaDataItem>
    <MetaDataItem name="ProductManual">https://Products.Z-WaveAlliance.org/ProductManual/File?folder=&amp;filename=Manuals/2078/009402Manual.pdf</MetaDataItem>
    <MetaDataItem id="0004" name="Identifier" type="0004">Ei600ZW</MetaDataItem>
    <MetaDataItem name="ExclusionDescription">To exclude the device start the inclusion on your controller and then hit  the little button on the wireless module for 1 second</MetaDataItem>
    <MetaDataItem id="0004" name="FrequencyName" type="0004">CEPT (Europe)</MetaDataItem>
    <MetaDataItem name="InclusionDescription">To include the device start the inclusion on your controller and then hit the little button on the wireless module for 1 second</MetaDataItem>
    <MetaDataItem name="Name">10 Year Smoke Detector and Siren</MetaDataItem>
    <ChangeLog>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="02 Jun 2019" revision="4">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/2078/xml</Entry>
    </ChangeLog>
  </MetaData>
  <!-- Popp: 10 Year Smoke Detector and Siren (POPE009402)

Requires PCB 1.5 and firmware 1.14 (or higher)

http://manuals-backend.z-wave.info/make.php?lang=en&sku=pope009402&type=popp

-->

	<!-- Configuration  -->
  <CommandClass id="112">
    <Value genre="config" index="1" instance="1" label="Siren alarm sequence interval" max="127" min="6" size="1" type="byte" value="10">
      <Help>The additional siren is creating a different acoustic signal differentiate from the smoke alarm. This sound is partly on and partly off. This parameter defines the total length of the interval in seconds.</Help>
    </Value>
    <Value genre="config" index="2" instance="1" label="Siren alarm tone length" max="99" min="1" size="1" type="byte" value="8">
      <Help>The additional siren is creating a different acoustic signal differentiate from the smoke alarm. This sound is partly on and partly off. This parameter defines the total length of the sound versus silence within this interval. Please make sure this value is always smaller (shorter time) than parameter 1 that defines the whole sequence.</Help>
    </Value>
    <Value genre="config" index="3" instance="1" label="Value of On-Command" max="99" min="0" size="1" type="byte" value="99">
      <Help>This value is sent as BASIC Set to Association Group 3 when an Smoke Alarm occurs.</Help>
    </Value>
    <Value genre="config" index="4" instance="1" label="Value of Off-Command" max="99" min="0" size="1" type="byte" value="99">
      <Help>This value is sent as BASIC Set to Association Group 3 when an Smoke Alarm is cleared. </Help>
    </Value>
  </CommandClass>
  <!-- Association Groups -->
  <CommandClass id="133">
    <Associations num_groups="3">
      <Group index="1" label="Lifeline" max_associations="10"/>
      <Group index="2" label="Alarm Reports" max_associations="10"/>
      <Group index="3" label="Switching Command when Alarm" max_associations="10"/>
    </Associations>
  </CommandClass>
</Product>