etckeeper/openzwave/idlock/idlock150.xml

<Product Revision="4" xmlns="https://github.com/OpenZWave/open-zwave">
  <MetaData>
    <MetaDataItem name="Name">ID Lock 150 Z-Wave module</MetaDataItem>
    <MetaDataItem name="Description">A module enabling your ID Lock digital door lock to a Z-Wave Plus enabled digital door Lock.

The module is compatible with ID Lock 101 and ID Lock 150.

It enables your ID Lock to operate in a Z-Wave network with numerous access control funtions and notifications.</MetaDataItem>
    <MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/0373:0001:0003</MetaDataItem>
    <MetaDataItem name="ProductPage">https://idlock.no/z-wave/</MetaDataItem>
    <MetaDataItem name="ProductSupport">https://idlock.no/kundesenter/</MetaDataItem>
    <MetaDataItem name="ProductPic">images/idlock/idlock150.png</MetaDataItem>
    <MetaDataItem name="ProductManual">https://idlock.no/wp-content/uploads/2019/08/IDLock150_ZWave_UserManual_v3.02.pdf</MetaDataItem>
    <MetaDataItem name="WakeupDescription">Activate by touching the touch panel with finger(s), the palm of the hand on the outside unit or by pushing the key button on the inside unit.</MetaDataItem>
    <MetaDataItem name="InclusionDescription">Inclusion – (Puts your device in inclusion mode)

•	 Push and hold key button until all LEDs on touch panel activates (with ID Lock in an unlocked state).
•	 Release button.
•	 Enter Master PIN followed by * on touch panel.
•	 Press digit "2" for settings followed by * on touch panel.
•	 Press digit “5” on touch panel.

Inclusion mode starts immediately. LED indicator below logo signals this by flashing blue.</MetaDataItem>
    <MetaDataItem name="ExclusionDescription">Exclusion – (Puts your device in exclusion mode)

•	 Push and hold key button until all LEDs on touch panel activates (with ID Lock in an unlocked state).
•	 Release button.
•	 Enter Master PIN followed by * on touch panel.
•	 Press digit "2" for settings followed by * on touch panel.
•	 Press digit “5” on touch panel.

Exclusion mode starts immediately. LED indicator below logo signals this by flashing blue.</MetaDataItem>
    <MetaDataItem name="ResetDescription">Device reset – (This will reset RF interface module to factory default settings)
Warning: Please do only proceed with the following reset procedure, if primary network controller is missing or otherwise inoperable.

RESET Z-WAVE MODULE:

• Push and hold key button until all LEDs on touch panel activates (with ID Lock in an unlocked state).
• Release button.
• Enter Master PIN followed by * on keypad.
• Press digit "2" for settings followed by * on keypad.
• Press digit “0” on keypad.

If the Z-wave module is not included in a Z-wave network the door lock will also return to factory settings when following the above procedure.

FACTORY RESET DOOR LOCK FIRMWARE:

•	 Push and hold inside lock/unlock button while inserting the fourth battery.
•	 Receive reset sound.
•	 Release button.
•	 Receive confirmation sound.</MetaDataItem>
    <MetaDataItem id="0001" name="ZWProductPage" type="0003">https://products.z-wavealliance.org/products/2780/</MetaDataItem>
    <MetaDataItem id="0001" name="FrequencyName" type="0003">CEPT (Europe)</MetaDataItem>
    <MetaDataItem id="0001" name="Identifier" type="0003">ID-150</MetaDataItem>
    <ChangeLog>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="02 Jun 2019" revision="2">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/2780/xml</Entry>
      <Entry author="Eirik Hodne" date="25 Aug 2019" revision="3">Update as per the 1.4.9/1.6 firmware specification</Entry>
      <Entry author="into-void" date="09 Sep 2020" revision="4">Update as per the 1.5.6/1.6 firmware specification</Entry>
    </ChangeLog>
  </MetaData>
  <!-- Configuration Parameters -->

  <!--COMMAND_CLASS_CONFIGURATION_V1-->
  <CommandClass id="112">
    <Value genre="config" index="1" label="Door Lock Mode" max="3" min="0" size="1" type="list" units="" value="1">
      <Help>
        Door Lock Mode
        Autolock Mode, Manual lock mode, Activate Away Mode, Deactivate Away Mode
        Default Value : 1 ( Auto lock, Away off )
      </Help>
      <Item label="Manual lock, Away off" value="0"/>
      <Item label="Auto lock, Away off" value="1"/>
      <Item label="Manual lock, Away on" value="2"/>
      <Item label="Auto lock, Away on" value="3"/>
    </Value>
    <Value genre="config" index="2" label="RFID Mode" max="9" min="5" size="1" type="list" units="" value="5">
      <Help>
        RFID Mode
        RFID activated
        RFID deactivated
        Default Value: 5 (RFID activated)
      </Help>
      <Item label="RFID activated" value="5"/>
      <Item label="RFID deactivated" value="9"/>
    </Value>
    <Value genre="config" index="3" label="Door Hinge Direction" max="1" min="0" size="1" type="list" units="" value="0">
      <Help>
        Door Hinge Position
        Default Value : 0 (Right hinged operation)
      </Help>
      <Item label="Right hinged operation" value="0"/>
      <Item label="Left hinged operation" value="1"/>
    </Value>
    <Value genre="config" index="4" label="Door Audio Volume" max="6" min="0" size="1" type="list" units="" value="5" write_only="true">
      <Help>
        Door Audio Volume Level
        This parameter is a set only parameter. If the value is changed locally on the door lock, this value will not change.
        Default Value : 5
      </Help>
      <Item label="No Sound" value="0"/>
      <Item label="Level 1" value="1"/>
      <Item label="Level 2" value="2"/>
      <Item label="Level 3" value="3"/>
      <Item label="Level 4" value="4"/>
      <Item label="Level 5" value="5"/>
      <Item label="Max. Sound Level" value="6"/>
    </Value>
    <Value genre="config" index="5" label="Door ReLock Mode" max="1" min="0" size="1" type="list" units="" value="1">
      <Help>
        Door ReLock Mode
        Default Value: 1 (Enabled)
      </Help>
      <Item label="Disabled" value="0"/>
      <Item label="Enabled" value="1"/>
    </Value>
    <Value genre="config" index="6" label="Service PIN Mode" max="9" min="0" size="1" type="list" units="" value="0" write_only="true">
      <Help>
        Service PIN Mode
        A configuration get command on this parameter returns the latest set parameter value (set by Z-wave).
        This is a set only value, if changed locally on keypad these values are not changed on Z-wave module. Value 5 and 6 will generate a random PIN in location 108.
        Disabled: Disables both PIN and Service PIN menu on door lock

        Default Value: 0 (Deactivated)
      </Help>
      <Item label="Deactivated" value="0"/>
      <Item label="1 times used" value="1"/>
      <Item label="2 times used" value="2"/>
      <Item label="5 times used" value="3"/>
      <Item label="10 times used" value="4"/>
      <Item label="Random PIN 1x use" value="5"/>
      <Item label="Random PIN 24hrs use" value="6"/>
      <Item label="Always valid" value="7"/>
      <Item label="12 Hours used" value="8"/>
      <Item label="24 Hours used" value="9"/>
      <Item label="Disabled (PIN and Service PIN)" value="254" />
    </Value>
    <Value genre="config" index="7" label="Door Lock Model Type" max="150" min="101" read_only="true" type="byte" units="" value="150">
      <Help>
        Door Lock Model Type
        This configuration is only accepted by configuration get command
        It is a read only parameter. Default value depends on the door lock model type.
      </Help>
    </Value>
    <Value genre="config" index="8" label="Updater Mode" max="3" min="0" type="list" units="" value="0" size="1">
      <Help>
        Updater Mode

        Enables use of the Updater app.
        Default Value: 0 (Off, no sound)
      </Help>
      <Item label="Off (no sound)" value="0"/>
      <Item label="On (no sound)" value="1"/>
      <Item label="Off" value="2"/>
      <Item label="On" value="3"/>
    </Value>
    <Value genre="config" index="9" label="Master PIN Unlock Mode" max="1" min="0" read_only="true" type="list" units="" value="1" size="1">
      <Help>
        Master PIN Unlock Mode
      </Help>
      <Item label="Disabled" value="0"/>
      <Item label="Enabled" value="1"/>
    </Value>
  </CommandClass>
  <!-- Association Groups -->
  <CommandClass id="133">
    <Instance index="1"/>
    <Associations num_groups="1">
      <Group index="1" label="Lifeline" max_associations="5"/>
    </Associations>
  </CommandClass>
</Product>