etckeeper/openzwave/philio/psm02.xml

<Product Revision="8" xmlns="https://github.com/OpenZWave/open-zwave">
  <MetaData>
    <MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/013C:0002:0002</MetaDataItem>
    <MetaDataItem name="ProductPic">images/philio/psm02.png</MetaDataItem>
    <MetaDataItem id="0002" name="ZWProductPage" type="0002">https://products.z-wavealliance.org/products/836/</MetaDataItem>
    <MetaDataItem id="0002" name="Identifier" type="0002">PSM02-2</MetaDataItem>
    <MetaDataItem name="Description">Multi-sensor PSM02 has PIR, door/window, temperature and illumination, 4 sensors function in one, based on Z-Wave technology.

Features

 - (1)Door/window (2)PIR (3)illumination and (4)temperature functions in one sensor
 - Adopt newest Z-wave 400 series chip, support multichannel operation and higher data rate (9.6/40/100kbps)
 - Higher output power (+2.5dBm output power as compared to -2.5dBm 300 series Z-wave module) to enhance the communication range
 - 1500mA CR123A lithium battery to guarantee 2 year battery life
 - Built in light sensor while applied to light control
 - Adopt Z-Wave protocol to secure the success of wireless two way communication
 - With Tamper proof protection
 - Easy install
 - Low battery indication
 - Z-Wave V6.02
 - Auto report the open/close status and battery status
 - FCC part15.249 / EN300 220-1/ certification
 - NCC</MetaDataItem>
    <MetaDataItem name="Name">PSM02-2 Multi-Sensor</MetaDataItem>
    <MetaDataItem id="0002" name="FrequencyName" type="0002">CEPT (Europe) / Japan / U.S. / Canada / Mexico</MetaDataItem>
    <ChangeLog>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="03 May 2019" revision="5">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/821/xml</Entry>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="03 May 2019" revision="6">Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/835/xml</Entry>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="03 May 2019" revision="7">Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/836/xml</Entry>
      <Entry author="gizmocuz - " date="28 Jul 2019" revision="8">Fix Philio door sensors #1898</Entry>
    </ChangeLog>
    <MetaDataItem name="ProductPage">http://philio-tech.com/</MetaDataItem>
  </MetaData>
  <!-- Configuration Parameters -->
  <CommandClass id="112">
    <Value genre="config" index="2" instance="1" label="Basic Set Level" max="255" min="1" type="byte" value="255">
      <Help>
          Setting the BASIC command value to turn on the light. The 0xFF (255) means turn on the light. 
          For dimmer equipment 1 to 100 means the light strength.
	  </Help>
    </Value>
    <Value genre="config" index="3" instance="1" label="PIR Sensitivity" max="99" min="0" type="byte" value="70">
      <Help>
          PIR sensitivity settings. 
          0 means disable the PIR motion.
          1 means the lowest sensitivity.
          99 means the highest sensitivity.
          High sensitivity means can detect long distance, but if there is more noise signal in the environment, it will re-trigger too frequently. 
       </Help>
    </Value>
    <Value genre="config" index="4" instance="1" label="Light threshold" max="100" min="0" type="byte" value="99">
      <Help>
          Setting the illumination threshold to turn on the light. When the event triggered and the environment illumination lower than 
          the threshold, the device will turn on the light.
          0 means turn off illumination detected function and never turn on the light.
          1 means darkest.
          99 means brightest.
          100 means turn off illumination detected function. And always turn on the light.
          * Notice * in none test mode, only the value in 1 to 99 will enable the illumination detected function and update the illumination value.
       </Help>
    </Value>
    <Value genre="config" index="5" instance="1" label="Operation Mode" max="127" min="0" type="byte" value="0">
      <Help>
          Bit 0: 1 means security mode; 0 means home automation mode.
          Bit 1: 1 means enable test mode; 0 means disable test mode
          * Notice * Bit 0 and bit 1 will effect when the DIP Switch setting to program mode. If bit1 is enabled, the bit0 is useless.
          Bit 2: Reserved, always 1.
          Bit 3: Setting the temperature scale; 0: Fahrenheit, 1:Celsius
          Bit 4: Disable illumination report after event triggered.
          Bit 5: Disable temperature report after event triggered
       </Help>
    </Value>
    <Value genre="config" index="6" instance="1" label="Multi-Sensor Function Switch" max="127" min="0" type="byte" value="4">
      <Help>
          Multi-Sensor Function switch. Using bit to control.
          Bit 0: Reserved, always 1.
          Bit 1: Disable PIR integrate Illumination.
          Bit 2: Reserved, always 1.
          Bit 3: Reserved.
          Bit 4: Reserved.
          Bit 5: Reserved.
          Bit 6: Enable temperature monitoring. When this bit enabled, the temperature changed 3 degree Fahrenheit, it will report. 
          And also the temperature over 140 degree Fahrenheit, it will report every 64 seconds.
	  </Help>
    </Value>
    <Value genre="config" index="7" label="Customer Function" max="127" min="0" type="byte" value="4">
      <Help>
          Customer function switch, using bit control. 
          Bit 0: Reserve. 
          Bit 1: Enable sending motion OFF report (0:Disable, 1:Enable). 
				 Note: Depends on the Bit4, 0: Report Notification CC, Type: 0x07, Event: 0xFE 1: Sensor Binary Report, Type: 0x0C, Value: 0x00. 
          Bit 2: Enable PIR super sensitivity mode (0:Disable, 1:Enable).
          Bit 3: Disable send out BASIC OFF after door closed (1:Disable, 0:Enable). 
          Bit 4: Notification Type (0: Notification Report, 1: Sensor Binary Report).
          Bit 5: Disable Multi CC in auto report (1:Disable, 0:Enable).
          Bit 6: Disable to report battery state when the device triggered (1:Disable, 0:Enable)
          Bit 7: Reserve.
		  ozw recommended setting: 00010110 : 22
       </Help>
    </Value>
    <Value genre="config" index="8" instance="1" label="PIR re-detect interval time" max="27" min="3" type="byte" units="8 sec" value="3">
      <Help>
          In the security mode, after the PIR report motion detected, setting the re-detect time. 8 seconds per tick, and minimum time is 24 seconds, default tick is 3 (24 seconds).
          Setting the suitable value to prevent received the trigger signal too frequency. Also can save the battery energy.
          * Notice * If this value bigger than the configuration setting NO. 9. There is a period after the light turned off and the PIR not detecting.
       </Help>
    </Value>
    <Value genre="config" index="9" instance="1" label="Turn Off Light Time" max="127" min="4" type="byte" units="8 sec" value="4">
      <Help>
          After turn on the light, setting the delay time to turn off the light when the PIR motion is not detected.
          8 seconds per tick, and minimum time is 32 seconds, default tick is 4 (32 seconds).
       </Help>
    </Value>
    <Value genre="config" index="10" instance="1" label="Auto Report Battery Time" max="127" min="1" type="byte" units="30 min" value="12">
      <Help>
         The interval time for auto report the battery level.
         30 minutes per tick and minimum time is 30 minutes, default tick is 12 (6 hours)
      </Help>
    </Value>
    <Value genre="config" index="12" instance="1" label="Auto Report Illumination Time" max="127" min="1" type="byte" units="30 min" value="12">
      <Help>
         The interval time for auto report the illumination.
         30 minutes per tick and minimum time is 30 minutes, default tick is 12 (6 hours)
      </Help>
    </Value>
    <Value genre="config" index="13" instance="1" label="Auto Report Temperature time" max="127" min="1" type="byte" units="30 min" value="12">
      <Help>
         The interval time for auto report the temperature.
         30 minutes per tick and minimum time is 30 minutes, default tick is 12 (6 hours)
      </Help>
    </Value>
  </CommandClass>
  <!-- Basic set as report -->
  <!-- <CommandClass id="32" setasreport="true" ignoremapping="true"/> -->
  <CommandClass id="48">
    <Instance index="1"/>
    <Value genre="user" index="0" instance="1" label="Motion Sensor" max="0" min="0" read_only="true" type="bool" value="false" write_only="false"/>
    <Value genre="user" index="1" instance="1" label="Door/Window Sensor" read_only="true" type="bool" value="false" write_only="false"/>
    <Value genre="user" index="2" instance="1" label="Tamper Sensor" max="0" min="0" read_only="true" type="bool" value="false" write_only="false"/>
    <SensorMap index="0" type="12"/>
    <SensorMap index="1" type="10"/>
    <SensorMap index="2" type="8"/>
  </CommandClass>
  <!-- Association Groups -->
  <CommandClass id="133">
    <Associations num_groups="2">
      <Group index="1" label="Lifeline" max_associations="7"/>
      <Group auto="true" index="2" label="Light control" max_associations="7"/>
    </Associations>
  </CommandClass>
</Product>