etckeeper/openzwave/enerwave/zw15rmplus.xml

<!-- Enerwave ZW15RM Plus http://enerwaveautomation.com/products/smart-outlet-zwave-zw15rm/ --><Product Revision="3" xmlns="https://github.com/OpenZWave/open-zwave">
  <MetaData>
    <MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/011A:0105:0111</MetaDataItem>
    <MetaDataItem name="ProductPic">images/enerwave/zw15rmplus.png</MetaDataItem>
    <MetaDataItem id="0105" name="ZWProductPage" type="0111">https://products.z-wavealliance.org/products/1776/</MetaDataItem>
    <MetaDataItem name="Description">The ZW15RM TR Duplex Receptacle is a perfect wireless manual and remote on/off control replacement of regular receptacles, controlling table and floor lamps, small appliances, etc. It provides two different type outlets. One outlet with Z-Wave mark has programmable functions such as scenes, association, schedule event, etc. It is fully interoperable with other Z-Wave certified device from other manufacturers and/or other applications. It can report wattage energy usage or kWh energy usage to a Z-Wave gateway.It has a Blue LED on the face cover indicates the status of the controlled outlet and/or act as a night light. The other outlet with Tamper-Resistant feature provides constant power, helps you and your families prevent electrical injuries.</MetaDataItem>
    <MetaDataItem name="InclusionDescription">When the controller is in add mode and the blue LED is blinking on the
ZW15RM, press and hold the program button of ZW15RM for 3 second, and
then the controller will verify the add.</MetaDataItem>
    <MetaDataItem name="Name"> IN-Wall Smart Meter TR Duplex Receptacle</MetaDataItem>
    <MetaDataItem id="0105" name="FrequencyName" type="0111">U.S. / Canada / Mexico</MetaDataItem>
    <MetaDataItem name="ProductManual">https://Products.Z-WaveAlliance.org/ProductManual/File?folder=&amp;filename=Manuals/1776/ZW15RM(20160509 ).pdf</MetaDataItem>
    <MetaDataItem name="ExclusionDescription">When the controller is in remove mode, press and hold the program button of
ZW15RM for 3 second, and then the controller will remove it from the current
Z-Wave network, and the LED will blink on the receptacle,when power on.</MetaDataItem>
    <MetaDataItem name="ResetDescription">Once program button is pressed and hold for 10 second, the device will send a device reset locally notification to controller. Then clear all of information for
the network, and restore factory defaults, and reset the module. Use this  procedure only in the event that the network primary controller is missing or otherwise inoperable.</MetaDataItem>
    <MetaDataItem id="0105" name="Identifier" type="0111">ZW15RM</MetaDataItem>
    <ChangeLog>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="24 May 2019" revision="3">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1776/xml</Entry>
    </ChangeLog>
  </MetaData>
  <!-- Configuration Parameters -->
  <CommandClass id="112">
    <Value genre="config" index="1" label="LED mode" max="1" min="0" size="1" type="list" value="0">
      <Help>Synchronization of load power and LED indicator</Help>
      <Item label="Power on, LED off" value="0"/>
      <Item label="Power on, LED on" value="1"/>
    </Value>
    <Value genre="config" index="8" label="Instant Energy Autosend Interval" max="255" min="0" type="byte" units="minutes" value="0">
      <Help>How often to send the energy report for the moment-in-time usage (METER_REPORT version) automatically in minutes. 0 = disabled.</Help>
    </Value>
    <Value genre="config" index="9" label="Instant Multilevel Autosend Interval" max="255" min="0" type="byte" units="minutes" value="0">
      <Help>How often to send the energy report for the moment-in-time usage (SENSOR_MULTILEVEL_REPORT version) automatically in minutes. 0 = disabled.</Help>
    </Value>
    <Value genre="config" index="10" label="Accumulated Energy Autosend Interval" max="255" min="0" type="byte" units="minutes" value="0">
      <Help>How often to send the energy report for the accumulated energy usage usage (METER_REPORT) automatically in minutes. 0 = disabled.</Help>
    </Value>
    <Value genre="config" index="11" label="Wattage Change Notifications" max="3" min="0" size="1" type="list" value="1">
      <Help>Enable automatic notifications when there is a change in wattage.</Help>
      <Item label="No report" value="0"/>
      <Item label="Send METER_REPORT only (default)" value="1"/>
      <Item label="Send SENSOR_MULTILEVEL_REPORT only" value="2"/>
      <Item label="Send both reports (recommended)" value="3"/>
    </Value>
    <Value genre="config" index="12" label="Wattage Change Threshold" max="255" min="0" type="byte" units="0.1 watt" value="10">
      <Help>How much the wattage needs to change by to trigger the wattage change notifications. Units are 1-10th of a watt; 0-255: 0.0-25.5W</Help>
    </Value>
  </CommandClass>
  <CommandClass id="133">
    <Associations num_groups="3">
      <Group index="1" label="Lifeline" max_associations="1"/>
      <Group index="2" label="StatusReport: Send basic report" max_associations="5"/>
      <Group index="3" label="PowerReport: Send meter power report" max_associations="5"/>
    </Associations>
  </CommandClass>
</Product>