etckeeper/openzwave/zooz/zen26.xml

<!--
Zooz ZEN26 S2 On Off Wall Switch
https://products.z-wavealliance.org/products/3147
--><Product Revision="4" xmlns="https://github.com/OpenZWave/open-zwave">
	<MetaData>
		<MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/027A:A001:A000</MetaDataItem>
		<MetaDataItem name="ProductPic">images/zooz/zen26.png</MetaDataItem>
		<MetaDataItem id="A001" name="ZWProductPage" type="A000">https://products.z-wavealliance.org/products/3147/</MetaDataItem>
		<MetaDataItem name="ResetDescription">If your primary controller is missing or inoperable, you may need to reset the device to factory settings. To complete the reset process manually, tap-tap-tap’n’hold the upper paddle for at least 10 seconds. The LED indicator will flash to confirm successful reset.
NOTE: All previously recorded activity and custom settings will be erased from the device’s memory.</MetaDataItem>
		<MetaDataItem name="ExclusionDescription">1. Bring your Z-Wave gateway (hub) close to the switch if possible
2. Put the Z-Wave hub into exclusion mode (not sure how to do that?
ask@getzooz.com)
3. Tap the lower paddle on the switch 3 times quickly</MetaDataItem>
		<MetaDataItem name="InclusionDescription">1. Initiate inclusion (pairing) in the app (or web interface) of your hub.
2. Tap the upper paddle on the switch 3 times quickly.</MetaDataItem>
		<MetaDataItem id="A001" name="FrequencyName" type="A000">U.S. / Canada / Mexico</MetaDataItem>
		<MetaDataItem id="A001" name="Identifier" type="A000">ZEN26</MetaDataItem>
		<MetaDataItem name="ProductManual">https://Products.Z-WaveAlliance.org/ProductManual/File?folder=&amp;filename=Manuals/3147/zooz-z-wave-plus-s2-on-off-switch-zen26-manual.pdf</MetaDataItem>
		<MetaDataItem name="Name">S2 On Off Switch</MetaDataItem>
		<MetaDataItem name="Description">FEATURES:
- Manual or Z-Wave on/off control with instant status updates
- Simple Direct 3-Way: connect with existing on/off switches in 3-way, 4-way, and 5-way set-ups, no add-on needed (neutral wire required)
- Remembers and restores on/off status after power failure
- LED indicator signals inclusion, exclusion, reset, and setting changes
- Built-in Z-Wave Plus signal repeater to extend network range
- Works with LED, CFL, and incandescent bulbs
- S2 security protocol and the latest 500 Z-Wave chip for faster and safer wireless communication
- Supported by most Z-Wave controllers

SPECIFICATIONS:
- Model Number: ZEN26
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 120 VAC, 60 Hz
- Maximum Load: 8 A, 150 W LED/CFL, 600 W incandescent, 1200 W resistive
- Range: Up to 100 feet line of sight
- Operating Temperature: 32-104° F (0-40° C)
- Installation and Use: Indoor only

https://www.support.getzooz.com/kb/article/315-zooz-s2-on-off-switch-zen26-ver-2-03-advanced-settings/
MANUAL CONTROL
Upper Paddle:
1 x tap: load on; Scene 1, attribute 00 (button 1)
2 x tap: Scene 1, attribute 03 (button 3)
3 x tap: enter inclusion (pairing) mode; Scene 1, attribute 04 (button 5)
4 x tap: Scene 1, attribute 05 (button 7)
6 x tap: change LED indicator mode (see parameter 2)
10 x tap: change physical / Z-Wave control mode (see parameter 11)
tap-tap-tap-and-hold: factory reset

Lower Paddle: 
1 x tap: load off; Scene 2, attribute 00 (button 2)
2 x tap: Scene 2, attribute 03 (button 4)
3 x tap: enter exclusion (unpairing) mode; Scene 2, attribute 04 (button 6)
4 x tap: Scene 2, attribute 05 (button 8)
tap-tap-tap-and-hold: factory reset
	</MetaDataItem>
		<ChangeLog>
			<Entry author="Justin Hammond - Justin@dynam.ac" date="03 Jun 2019" revision="2">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/3147/xml</Entry>
			<Entry author="David Alden - dave@alden.name" date="23 Oct 2019" revision="3">Updated for firmware version 2.0</Entry>
			<Entry author="Brad Parker - https://github.com/bepsoccer" date="13 April 2020" revision="4">Updated for firmware version 2.03</Entry>
		</ChangeLog>
	</MetaData>
	<!-- Configuration Parameters -->
	<CommandClass id="112">
		<Value type="list" genre="config" index="1" label="Paddle Control" size="1" min="0" max="2" value="0">
			<Help>Normal mode: Upper paddle turns the light on, lower paddle turns the light off.  Reverse mode: Upper paddle turns the light off, lower paddle turns the light on.  Toggle mode: Either paddle toggles the light.</Help>
			<Item label="Normal" value="0"/>
			<Item label="Reverse" value="1"/>
			<Item label="Toggle" value="2"/>
		</Value>
		<Value type="list" genre="config" index="2" label="LED Indication Control" size="1" min="0" max="3" value="0">
			<Help>LED Indication light function.  Normal has the LED Indication on when the switch is off, off when the switch is on. </Help>
			<Item label="Normal" value="0"/>
			<Item label="Reverse" value="1"/>
			<Item label="Always Off" value="2"/>
			<Item label="Always On" value="3"/>
		</Value>
		<Value type="list" genre="config" index="3" label="Enable Auto Turn-Off Timer" size="1" min="0" max="1" value="0">
			<Help></Help>
			<Item label="Disabled" value="0"/>
			<Item label="Enabled" value="1"/>
		</Value>
		<Value type="int" genre="config" index="4" label="Auto Turn-Off Timer Duration" size="4" min="1" max="65535" value="60" units="minutes">
			<Help>Time, in minutes, for auto-off timer delay.</Help>
		</Value>
		<Value type="list" genre="config" index="5" label="Enable Auto Turn-On Timer" size="1" min="0" max="1" value="0">
			<Help></Help>
			<Item label="Disabled" value="0"/>
			<Item label="Enabled" value="1"/>
		</Value>
		<Value type="int" genre="config" index="6" label="Auto Turn-On Timer Duration" size="4" min="1" max="65535" value="60" units="minutes">
			<Help>Set the time (in minutes) after which you want the switch to automatically turn on once it has been turned off.</Help>
		</Value>
		<Value type="list" genre="config" instance="1" index="7" label="Association Reports" units="" min="0" max="15" value="15" size="1">
			<Help>Choose which physical and Z-Wave triggers should prompt the switch to send a status change report to associated devices.</Help>
			<Item label="none" value="0" />
			<Item label="physical tap on ZEN26 only" value="1" />
			<Item label="physical tap on connected 3-way switch only" value="2" />
			<Item label="physical tap on ZEN26 or connected 3-way switch" value="3" />
			<Item label="Z-Wave command from hub" value="4" />
			<Item label="physical tap on ZEN26 or Z-Wave command from hub" value="5" />
			<Item label="physical tap on connected 3-way switch or Z-Wave command from hub" value="6" />
			<Item label="physical tap on ZEN26 / connected 3-way switch or Z-Wave command from hub" value="7" />
			<Item label="timer only" value="8" />
			<Item label="physical tap on ZEN26 or timer" value="9" />
			<Item label="physical tap on connected 3-way switch or timer" value="10" />
			<Item label="physical tap on ZEN26 / connected 3-way switch or timer" value="11" />
			<Item label="Z-Wave command from hub or timer" value="12" />
			<Item label="physical tap on ZEN26, Z-Wave command from hub, or timer" value="13" />
			<Item label="physical tap on ZEN26 / connected 3-way switch, Z-Wave command from hub, or timer" value="14" />
			<Item label="all of the above. (default)" value="15" />
		</Value>
		<Value type="list" genre="config" index="8" label="On Off Status After Power Failure" size="1" min="0" max="2" value="2">
			<Help>Status after power failure.  Off: always turn light off.  On: always turn light on.  Restore: remember the latest state and restore that state.</Help>
			<Item label="Off" value="0"/>
			<Item label="On" value="1"/>
			<Item label="Restore" value="2"/>
		</Value>
		<Value type="list" genre="config" index="10" label="Enable/Disable Scene Control" size="1" min="0" max="1" value="0">
			<Help>Enable or Disable scene control functionality for quick double tap triggers (Available for select hubs only).</Help>
			<Item label="Disabled" value="0"/>
			<Item label="Enabled" value="1"/>
		</Value>
		<Value type="list" genre="config" instance="1" index="11" label="Smart Bulb Mode: Enable/Disable Paddle / Z-Wave Control" units="" min="0" max="2" value="1" size="1">
			<Help>Enable or disable local on/off control. If enabled, you’ll only be able to control the connected light via Z-Wave. Scenes and other functionality will still be available through paddles.</Help>
			<Item label="physical paddle control disabled" value="0" />
			<Item label="physical paddle control enabled (default)" value="1" />
			<Item label="physical paddle and Z-Wave control disabled" value="2" />
		</Value>
		<Value type="list" genre="config" instance="1" index="13" label="Reporting behavior with disabled physical control" units="" min="0" max="1" value="0" size="1">
			<Help>Set reporting behavior for disabled physical control.</Help>
			<Item label="switch reports on/off status and changes LED indicator state even if physical and Z-Wave control is disabled (default)" value="0" />
			<Item label="switch doesn't report on/off status or change LED indicator state when physical (and Z-Wave) control is disabled" value="1" />
		</Value>
	</CommandClass>
	<!-- Association Groups -->
	<CommandClass id="133">
		<Associations num_groups="2">
			<Group index="1" label="Lifeline" max_associations="1"/>
			<Group index="2" label="Status" max_associations="5"/>
		</Associations>
	</CommandClass>
</Product>