etckeeper/openzwave/devolo/mt02755.xml

<Product Revision="3" xmlns="https://github.com/OpenZWave/open-zwave">
  <MetaData>
    <MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/0175:0020:0002</MetaDataItem>
    <MetaDataItem name="ProductPic">images/devolo/mt02755.png</MetaDataItem>
    <MetaDataItem id="0020" name="ZWProductPage" type="0002">https://products.z-wavealliance.org/products/2226/</MetaDataItem>
    <MetaDataItem name="InclusionDescription">1. Have Z-Wave™  Controller entered inclusion mode.
2. Pressing the tamper key three times within 1.5 
seconds to enter the inclusion mode.
3. After add successful, the device will wake to 
receive the setting command from Z-Wave™ 
Controller about 20 seconds.
</MetaDataItem>
    <MetaDataItem id="0020" name="Identifier" type="0002">MT02755</MetaDataItem>
    <MetaDataItem name="ResetDescription">Notice: Use this procedure only in the event 
that the primary controller is lost or 
otherwise inoperable.
1. Pressing tamper key four times within 1.5 seconds 
and do not release the tamper key in the 4 th  
pressed, and the LED will light ON.
2. After 3 seconds the LED will turn OFF, after that 
within 2 seconds, release the tamper key. If 
successful, the LED will light ON one second. 
Otherwise, the LED will flash once.
3. IDs are excluded and all settings will reset to 
factory default.</MetaDataItem>
    <MetaDataItem name="Description">MT02755 has temperature and humidity,based on Z-Wave™ technology.
It is the  Z-Wave™   plus product, it support the security, OTA... Those newest features of the  Z-Wave™   technology.  Z-Wave™ is a wireless communication protocol designed for home automation, specifically to remotely   control   applications   in   residential   and   light   commercial environments. The technology uses a low-power RF radio embedded or retrofitted into home electronics devices and systems, such as lighting, home access control, entertainment systems and household appliances.
This product can be included and operated in any Z-Wave™   network with other Z-Wave™  certified devices from other manufacturers and/or other applications.  All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the
network. 
</MetaDataItem>
    <MetaDataItem name="WakeupDescription">When the device power on, the device will wake about 20 seconds. In
this duration, the controller can communicate with the device. Normally
the device is always sleeping to save the battery energy.
</MetaDataItem>
    <MetaDataItem name="ExclusionDescription">1. Have Z-Wave™  Controller entered exclusion mode.
2. Pressing tamper key three times within 1.5 seconds
to enter the exclusion mode.
Node ID has been excluded.
</MetaDataItem>
    <MetaDataItem id="0020" name="FrequencyName" type="0002">CEPT (Europe)</MetaDataItem>
    <MetaDataItem name="Name">Humidity Sensor</MetaDataItem>
    <MetaDataItem name="ProductManual">https://Products.Z-WaveAlliance.org/ProductManual/File?folder=&amp;filename=Manuals/2226/MT02756_MT02755_Manual.pdf</MetaDataItem>
    <ChangeLog>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="02 Jun 2019" revision="3">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/2226/xml</Entry>
    </ChangeLog>
  </MetaData>
  <!--
    Devolo Humidity Sensor MT02755
    http://products.z-wavealliance.org/products/2226
    -->
    <!-- COMMAND_CLASS_CONFIGURATION. Configuration Parameters -->
  <CommandClass id="112">
    <Value genre="config" index="5" instance="1" label="Operation Mode" size="1" type="list" value="0">
      <Help></Help>
      <Item label="Fahrenheit" value="0"/>
      <Item label="Celsius" value="41"/>
    </Value>
    <Value genre="config" index="7" instance="1" label="Costumer Function" max="255" min="0" type="byte" units="" value="0">
      <Help>
                16 Notification Type, 0:Using Notification Report. 16:Using Sensor Binary Report.
                32 Disable Multi CC in auto report.
            </Help>
    </Value>
    <Value genre="config" index="10" instance="1" label="Auto Report Battery Time" max="127" min="0" type="byte" units="" value="12">
      <Help>
                The interval time for auto report the battery level.
                0 means turn off auto report.
                The default value is 12.
                The tick time can be set by the configuration No.20.
            </Help>
    </Value>
    <Value genre="config" index="13" label="Auto Report Temperature time" max="127" min="0" type="byte" units="30 min" value="12">
      <Help>
                The interval time for auto report the temperature. 0 means turn off auto report temperature. The default value is 12. The tick time can setting by the configuration No.20.
            </Help>
    </Value>
    <Value genre="config" index="14" label="Auto Report Humidity time" max="127" min="0" type="byte" units="30 min" value="12">
      <Help>
                The interval time for auto report the humidity. 0 means turn off auto report humidity. The default value is 12. The tick time can setting by the configuration No.20.
            </Help>
    </Value>
    <Value genre="config" index="20" instance="1" label="Auto Report Tick Interval" max="255" min="0" type="byte" units="minute" value="30">
      <Help>
                The interval time for auto report each tick.
                Setting this configuration will effect configuration No.10, No.13, No.14.
                Units of one minute.
                Caution1: Setting to 0 means turn off all auto report function.
                Caution2: The value is unsigned byte
            </Help>
    </Value>
    <Value genre="config" index="21" label="Temperature Differential Report" max="127" min="0" type="byte" value="1">
      <Help>
                The temperature differential to report. 0 means turn off this function. The unit is Fahrenheit. Enable this function the device will detect every minutes. And when the temperature is over 140 degree Fahrenheit, it will continue report. Enable this functionality will cause some issue please see the detail in the "Temperature Report" section.
            </Help>
    </Value>
    <Value genre="config" index="23" label="Humidity Differential Report" max="60" min="0" type="byte" units="%" value="1">
      <Help>
                The humidity differential to report. 0 means turn off this function. The unit is %.
            </Help>
    </Value>
  </CommandClass>
  <!-- COMMAND_CLASS_BASIC -->
  <CommandClass id="32">
    <Compatibility>
      <SetAsReport>true</SetAsReport>
    </Compatibility>
  </CommandClass>
  <!-- Association Groups -->
  <CommandClass id="133">
    <Associations num_groups="1">
      <Group index="1" label="Lifeline" max_associations="8"/>
    </Associations>
  </CommandClass>
</Product>