etckeeper/openzwave/telldus/tzdw100.xml

<!-- Telldus: TZDW-100 Door Opening Sensor --><Product Revision="2" xmlns="https://github.com/OpenZWave/open-zwave">
  <MetaData>
    <MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/0176:0001:0005</MetaDataItem>
    <MetaDataItem name="ProductPic">images/telldus/tzdw100.png</MetaDataItem>
    <MetaDataItem id="0001" name="ZWProductPage" type="0005">https://products.z-wavealliance.org/products/1455/</MetaDataItem>
    <MetaDataItem name="ExclusionDescription">Start the exclusion mode on the Z-Wave controller. Press the button on the device three times fast. The device will now be removed from the Z-Wave-network.</MetaDataItem>
    <MetaDataItem name="ProductManual">https://Products.Z-WaveAlliance.org/ProductManual/File?folder=&amp;filename=Manuals/1455/Quickguide_Sensor_Switch_107x153mm_PMS.pdf</MetaDataItem>
    <MetaDataItem name="InclusionDescription">Automatically add device to network
When a battery is inserted, the device is in automatical add mode for one minute (Network Wide Inclusion, NWI). This means that the device is added automatically when the Z-Wave controller enters add mode. 

Manual add device to network
Start the add mode on the Z-Wave controller. Press the button on the device three times fast. The device will now be added into the Z-Wave-network.</MetaDataItem>
    <MetaDataItem name="WakeupDescription">Press the button on the sensor one time short to wake up the device. </MetaDataItem>
    <MetaDataItem name="Name">Door/window sensor</MetaDataItem>
    <MetaDataItem name="ResetDescription">Press and hold the button until the LED starts flashing (approx. 6 seconds).
Press the button once more, short. 
The device will now reset to factory defaults. The LED will now flash, indicating that it’s no longer added in any Z-Wave network.

Please note! Only use the reset procedure when the primary controller is missing or inoperable.</MetaDataItem>
    <MetaDataItem id="0001" name="FrequencyName" type="0005">CEPT (Europe)</MetaDataItem>
    <MetaDataItem id="0001" name="Identifier" type="0005">TZDW-100</MetaDataItem>
    <MetaDataItem name="Description">This magnet sensor contains the latest Z-Wave technology with the ability to remotely control other Z-Wave units available in your network. The fact that it is battery operated and so small you can virtually place it anywhere you want – on doors, windows or drawers, without the need of wiring. Screw or tape up the holder and then click the sensor in place. Done! The sensor is designed to be seen as little as possible and we have made it significantly smaller than other sensors. It consists of two parts that will merge into a stylish unit when the sensor is closed.</MetaDataItem>
    <ChangeLog>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="08 May 2019" revision="2">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1455/xml</Entry>
    </ChangeLog>
  </MetaData>
  <!-- Configuration -->
  <CommandClass id="112">
    <Value genre="config" index="1" instance="1" label="Type of command no. 2" size="1" type="list" value="0">
      <Help>Type of input no. 2, what the input 1 will report if no contact is made</Help>
      <Item label="Basic" value="0"/>
      <Item label="Switch Binary" value="1"/>
      <Item label="Switch All" value="2"/>
      <Item label="Switch Multilevel" value="3"/>
    </Value>
    <Value genre="config" index="2" instance="1" label="Forced Level of Dimming group 2" max="255" min="1" type="byte" value="255">
      <Help>Possible parameter settings: (1 - 63) and 255. When setting 255 will automatically be set dimmer to the previous condition i.e 30% or what the last state was.</Help>
    </Value>
    <Value genre="config" index="3" instance="1" label="Type of commands no. 2" max="1" min="0" size="1" type="list" value="0">
      <Help>Type of commands to association group 2</Help>
      <Item label="Normal" value="0"/>
      <Item label="Inverted" value="1"/>
    </Value>
    <Value genre="config" index="4" instance="1" label="Type of command no. 3" size="1" type="list" value="0">
      <Help>Type of input no. 3, what the input 3 will report if no contact is made</Help>
      <Item label="Basic" value="0"/>
      <Item label="Switch Binary" value="1"/>
      <Item label="Switch All" value="2"/>
      <Item label="Switch Multilevel" value="3"/>
    </Value>
    <Value genre="config" index="5" instance="1" label="Forced Level of Dimming group 3" max="255" min="1" type="byte" value="255">
      <Help>Possible parameter settings: (1 - 63) and 255. When setting 255 will automatically be set dimmer to the previous condition i.e 30% or what the last state was.</Help>
    </Value>
    <Value genre="config" index="6" instance="1" label="Type of commands no. 3" max="1" min="0" size="1" type="list" value="0">
      <Help>Type of commands to association group 3</Help>
      <Item label="Normal" value="0"/>
      <Item label="Inverted" value="1"/>
    </Value>
    <Value genre="config" index="7" instance="1" label="Status change signalled by LED" max="1" min="0" size="1" type="list" value="1">
      <Help>Status change signalled by LED. Default setting: LED turned On</Help>
      <Item label="LED turned Off" value="0"/>
      <Item label="LED turned On" value="1"/>
    </Value>
    <Value genre="config" index="8" instance="1" label="Sent in the Lifeline" max="1" min="0" size="1" type="list" value="0">
      <Help>Select the type of command to be sent in the Lifeline</Help>
      <Item label="Notification" value="0"/>
      <Item label="Sensor binary" value="1"/>
    </Value>
  </CommandClass>
  <!-- Association Groups -->
  <CommandClass id="133">
    <Associations num_groups="3">
      <Group index="1" label="Lifeline" max_associations="1"/>
      <Group index="2" label="Sensor changes" max_associations="10"/>
      <Group index="3" label="Opened only" max_associations="10"/>
    </Associations>
  </CommandClass>
</Product>