etckeeper/openzwave/ge/46204-dimmer-toggle.xml

<!-- GE(Jasco) 46203 Z-Wave Plus Dimmer Switch -->
<!-- Configuration Parameters - per http://products.z-wavealliance.org/products/3323 -->
<Product Revision="1" xmlns="https://github.com/OpenZWave/open-zwave">
  <MetaData>
    <MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/0063:3237:4944</MetaDataItem>
    <MetaDataItem name="ProductPic">images/ge/46204-dimmer-toggle.png</MetaDataItem>
    <MetaDataItem id="3235" name="ZWProductPage" type="4944">https://products.z-wavealliance.org/products/3352/</MetaDataItem>
    <MetaDataItem name="Name">In-Wall Smart Toggle Dimmer</MetaDataItem>
    <MetaDataItem name="ProductManual">https://products.z-wavealliance.org/ProductManual/File?folder=&amp;filename=MarketCertificationFiles/3352/14295.46204%20Binder.pdf</MetaDataItem>
    <MetaDataItem id="3235" name="FrequencyName" type="4944">U.S. / Canada / Mexico</MetaDataItem>
    <MetaDataItem name="ResetDescription">Quickly press ON (up) button three times then immediately press the OFF (down)  button three times. 
    NOTE: This should only be used in the event your network’s
    primary controller is missing or otherwise inoperable.</MetaDataItem>
    <MetaDataItem name="InclusionDescription">1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.
    2. Once the controller is ready to add your device, press up and release the toggle. Please reference the controller’s manual for instructions.
    Now, you have complete control to turn your fixture ON/OFF or dim according to groups, scenes, schedules and interactive automations programmed by your controller. If your Z-Wave certified controller features remote access, you can control your fixture from your mobile devices.</MetaDataItem>
    <MetaDataItem name="Description">In-Wall Smart Toggle Dimmer with QuickFit and SimpleWire enhancements. Revolutionary QuickFit design features a housing depth that is up to 20 percent smaller than the previous Z-Wave models. This reduced size coupled with the elimination of heat taps provides a better fit in older style boxes and multi-gang configurations. SimpleWire technology allows line and load to automatically be configured with auto-sensing line-load terminals. All of this is coupled with Z-Wave S2 and Smart Start allows for effortless installation while being safer than ever!</MetaDataItem>
    <MetaDataItem id="3237" name="Identifier" type="4944">14295/46204/ZW3011</MetaDataItem>
    <MetaDataItem name="ExclusionDescription">To remove and reset the device: 
    1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network. 
    2. Once the controller is ready to remove your device, press up and release the toggle.</MetaDataItem>
    <ChangeLog>
      <Entry author="Dejan Zelic" date="14 Jul 2020" revision="1">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/Products/3352/XML</Entry>
    </ChangeLog>
  </MetaData>
  <CommandClass id="112">
    <Value genre="config" index="3" label="LED Indication Configuration" max="3" min="0" size="1" type="list" value="2">
      <Help>Adjust the LED status to default, invert, always OFF or always ON</Help>
      <Item label="Device is ON, LED is OFF; device is OFF, LED is ON" value="0"/>
      <Item label="Device is ON, LED is ON; device is OFF, LED is OFF" value="1"/>
      <Item label="LED always OFF" value="2"/>
      <Item label="LED always ON" value="3"/>
    </Value>
    <Value genre="config" index="6" label="Dim up/down rate" max="1" min="0" size="1" type="list" value="0">
      <Help>Adjust the speed at which the ramps to a specific value other than 0 and FF</Help>
      <Item label="Dim up/down the light to the specified level quickly by command except value 0 and FF" value="0"/>
      <Item label="Dim up/down the light to the specified level slowly by command except value 0 and ff" value="1"/>
    </Value>
    <Value genre="config" index="16" label="Switch Mode" max="1" min="0" size="1" type="list" value="0">
      <Help>Turn your dimmer into an On/Off switch with switch mode</Help>
      <Item label="Disable normal operation" value="0"/>
      <Item label="Enable switch mode" value="1"/>
    </Value>
    <Value genre="config" index="19" label="Alternate Exclusion"  max="1" min="0" size="1" type="list" value="0">
      <Help>Never accidentally remove a device during with alternate exclusion</Help>
      <Item label="Normal operation, press any button on the device" value="0"/>
      <Item label="Press two times ON button and two times OFF button, LED will flash 5 times if exclusion is successful" value="1"/>
    </Value>
    <Value genre="config" index="30" label="Minimum Dim Threshold" max="99" min="1" type="byte" units="" value="1">
      <Help>Set the minimum dimmer threshold</Help>
    </Value>
    <Value genre="config" index="31" label="Maximum Brightness Threshold" max="99" min="1" type="byte" units="" value="99">
      <Help>Set the brightness threshold</Help>
    </Value>
    <Value genre="config" index="32" label="Default Brightness Level" max="99" min="0" type="byte" units="" value="0">
      <Help>Set the default brightness level that the dimmer will turn on when being controlled manually</Help>
    </Value>
  </CommandClass>
  <!-- Association Groups -->
  <CommandClass id="133">
    <Associations num_groups="3">
      <Group index="1" label="Lifeline" max_associations="5"/>
      <Group index="2" label="Basic - Load" max_associations="5"/>
      <Group index="3" label="Basic - Double Tap" max_associations="5"/>
    </Associations>
  </CommandClass>
</Product>