etckeeper/openzwave/aeotec/zwa005.xml

<!--
ZWA005 TriSensor
--><Product Revision="6" xmlns="https://github.com/OpenZWave/open-zwave">
  <MetaData>
    <MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/0371:0005:0002</MetaDataItem>
    <MetaDataItem name="ProductPic">images/aeotec/zwa005.png</MetaDataItem>
    <MetaDataItem id="0005" name="ZWProductPage" type="0002">https://products.z-wavealliance.org/products/2898/</MetaDataItem>
    <MetaDataItem id="0005" name="FrequencyName" type="0002">CEPT (Europe)</MetaDataItem>
    <MetaDataItem name="ProductManual">https://Products.Z-WaveAlliance.org/ProductManual/File?folder=&amp;filename=Manuals/2919/TriSensor user manual 20180416.pdf</MetaDataItem>
    <MetaDataItem name="Description">Aeotec TriSensor is a universal Z-Wave Plus compatible product, consists of temperature, lighting and motion sensors, powered by a CR123A battery. It can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications. By the built-in motion sensor, an alam will be sent to the gateway when the motion sensor is triggered.
</MetaDataItem>
    <MetaDataItem name="ExclusionDescription">Press once TriSensor’s Action Button, the Purple LED will keep solid until whole network processing is complete. If the exclusion is successful, the LED will flash white -> green -
>white -> green and then LED will pulse a blue. If failed, the yellow LED lasts for 30 seconds, then the green LED flashes once.
</MetaDataItem>
    <MetaDataItem name="WakeupDescription">Press and hold the button at least 2s until Red Led is on and then release the button,device will send wakeup notification to controller if device is in a Z-Wave network.</MetaDataItem>
    <MetaDataItem id="0005" name="Identifier" type="0002">ZWA005-C</MetaDataItem>
    <MetaDataItem name="Name">TriSensor</MetaDataItem>
    <MetaDataItem name="InclusionDescription">Press once TriSensor’s Action Button. If it is the first installation, the yellow LED will keep solid until whole network processing is complete. If successful, the LED will flash white -> green -> white -> green, after 2 seconds finished. If failed, the yellow LED lasts for 30 seconds, then the green LED flashes once.
If it is the S2 encryption network, please enter the first 5 digits of DSK.
</MetaDataItem>
    <MetaDataItem name="ResetDescription">1.	Power up the device.
2.	Press and hold the button for 15s until Red Led is blinking,then release the button. Note: Please use this procedure only when the network primary controller is missing or otherwise inoperable.
</MetaDataItem>
    <ChangeLog>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="02 Jun 2019" revision="4">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/2898/xml</Entry>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="02 Jun 2019" revision="5">Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/2919/xml</Entry>
      <Entry author="David Goodlad - david@goodlad.net" date="28 Jul 2019" revision="6">Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/2920/xml</Entry>
    </ChangeLog>
    <MetaDataItem id="0005" name="ZWProductPage" type="0102">https://products.z-wavealliance.org/products/2919/</MetaDataItem>
    <MetaDataItem id="0005" name="Identifier" type="0102">ZWA005-A</MetaDataItem>
    <MetaDataItem id="0005" name="FrequencyName" type="0102">U.S. / Canada / Mexico</MetaDataItem>
    <MetaDataItem id="0005" name="ZWProductPage" type="0202">https://products.z-wavealliance.org/products/2920/</MetaDataItem>
    <MetaDataItem id="0005" name="Identifier" type="0202">ZWA005-B</MetaDataItem>
    <MetaDataItem id="0005" name="FrequencyName" type="0202">Australia / New Zealand</MetaDataItem>
  </MetaData>
  <!-- Configuration Parameters -->
  <CommandClass id="32">
    <Compatibility>
      <GetSupported>false</GetSupported>
    </Compatibility>
  </CommandClass>
  <CommandClass id="112">
    <Value genre="config" index="1" label="Motion Re-trigger Time" max="32767" min="0" type="short" units="Second" value="30">
      <Help>
                This parameter is configured the delay time before PIR sensor can be triggered again to reset motion timeout counter.
				Value = 0 will disable PIR sensor from triggering until motion timeout has finished.
            </Help>
    </Value>
    <Value genre="config" index="2" label="Motion clear time" max="32767" min="1" type="short" units="Second" value="240">
      <Help>
                This configures the clear time when your motion sensor times out and sends a no motion status.
            </Help>
    </Value>
    <Value genre="config" index="3" instance="1" label="Motion Sensitivity" max="11" min="0" size="1" type="list" value="8">
      <Help>
				This parameter is configured the sensitivity that motion detect.
				0  - PIR sensor disabled.
				1  - Lowest sensitivity.
				11 - Highest sensitivity.
			</Help>
      <Item label="Disabled" value="0"/>
      <Item label="1" value="1"/>
      <Item label="2" value="2"/>
      <Item label="3" value="3"/>
      <Item label="4" value="4"/>
      <Item label="5" value="5"/>
      <Item label="6" value="6"/>
      <Item label="7" value="7"/>
      <Item label="8" value="8"/>
      <Item label="9" value="9"/>
      <Item label="10" value="10"/>
      <Item label="11" value="11"/>
    </Value>
    <Value genre="config" index="4" instance="1" label="Binary Sensor Report" max="1" min="0" size="1" type="list" value="0">
      <Help>Enable/disable sensor binary report when motion event is detected or cleared</Help>
      <Item label="Disable" value="0"/>
      <Item label="Enable" value="1"/>
    </Value>
    <Value genre="config" index="5" instance="1" label="Disable BASIC_SET to Associated nodes" max="3" min="0" size="1" type="list" value="3">
      <Help>This parameter is configured the enabled or disabled send BASIC_SET command to nodes that associated in group 2 and group 3.</Help>
      <Item label="Disabled All Group Basic Set Command" value="0"/>
      <Item label="Enabled Group 2" value="1"/>
      <Item label="Enabled Group 3 " value="2"/>
      <Item label="Enabled Group 2 and Group 3" value="3"/>
    </Value>
    <Value genre="config" index="6" instance="1" label="Basic Set Value Settings for Group 2" max="5" min="0" size="1" type="list" value="0">
      <Help>Define Basic Set Value  when motion event is triggered and / or cleared</Help>
      <Item label="0xFF when motion is triggered and 0x00 when motion is cleared" value="0"/>
      <Item label="0x00 when motion is triggered and 0xFF when motion is cleared" value="1"/>
      <Item label="0xFF when motion is triggered" value="2"/>
      <Item label="0x00 when motion is triggered" value="3"/>
      <Item label="0x00 when motion event is cleared" value="4"/>
      <Item label="0xFF when motion event is cleared" value="5"/>
    </Value>
    <Value genre="config" index="7" label="Temperature Alarm Value" type="short" units="0.1" value="239">
      <Help>
                This parameter is configured the threshold value that alarm level for temperature.
				When the current ambient temperature value is larger than this configuration value, device will send a BASIC_SET = 0xFF to nodes associated in group 3.
				If current temperature value is less than this value, device will send a BASIC_SET = 0x00 to nodes associated in group 3.
				Value = [Value] x 0.1(Celsius / Fahrenheit)
				Available Settings: -400 to 850 (40.0 to 85.0 Celsius) or -400 to 1185 (-40.0 to 118.5 Fahrenheit).
				Default value: 239 (23.9 Celsius) or 750 (75.0 Fahrenheit)
            </Help>
    </Value>
    <Value genre="config" index="10" instance="1" label="LED over TriSensor" max="1" min="0" size="1" type="list" value="1">
      <Help>
				Enable or Disable LED over TriSensor
				This completely disables all LED reaction regardless of Parameter 9 - 13 settings
			</Help>
      <Item label="Disable" value="0"/>
      <Item label="Enable" value="1"/>
    </Value>
    <Value genre="config" index="11" instance="1" label="Motion report LED" max="8" min="0" size="1" type="list" value="2">
      <Help>
				This setting changes the color of the LED when your TriSensor sends a motion report.
			</Help>
      <Item label="Disabled" value="0"/>
      <Item label="Red" value="1"/>
      <Item label="Green" value="2"/>
      <Item label="Blue" value="3"/>
      <Item label="Yellow" value="4"/>
      <Item label="Pink" value="5"/>
      <Item label="Cyan" value="6"/>
      <Item label="Purple" value="7"/>
      <Item label="Orange" value="8"/>
    </Value>
    <Value genre="config" index="12" instance="1" label="Temperature report LED" max="1" min="0" size="1" type="list" value="0">
      <Help>
				This setting changes the color of the LED when your TriSensor sends a temperature report.
			</Help>
      <Item label="Disabled" value="0"/>
      <Item label="Red" value="1"/>
      <Item label="Green" value="2"/>
      <Item label="Blue" value="3"/>
      <Item label="Yellow" value="4"/>
      <Item label="Pink" value="5"/>
      <Item label="Cyan" value="6"/>
      <Item label="Purple" value="7"/>
      <Item label="Orange" value="8"/>
    </Value>
    <Value genre="config" index="13" instance="1" label="Light report LED" max="8" min="0" size="1" type="list" value="0">
      <Help>
				This setting changes the color of the LED when your TriSensor sends a light report.
			</Help>
      <Item label="Disabled" value="0"/>
      <Item label="Red" value="1"/>
      <Item label="Green" value="2"/>
      <Item label="Blue" value="3"/>
      <Item label="Yellow" value="4"/>
      <Item label="Pink" value="5"/>
      <Item label="Cyan" value="6"/>
      <Item label="Purple" value="7"/>
      <Item label="Orange" value="8"/>
    </Value>
    <Value genre="config" index="14" instance="1" label="Battery report LED" max="8" min="0" size="1" type="list" value="0">
      <Help>
				It is possible to change the color of what the LED blinks when your TriSensor sends a battery report.
			</Help>
      <Item label="Disabled" value="0"/>
      <Item label="Red" value="1"/>
      <Item label="Green" value="2"/>
      <Item label="Blue" value="3"/>
      <Item label="Yellow" value="4"/>
      <Item label="Pink" value="5"/>
      <Item label="Cyan" value="6"/>
      <Item label="Purple" value="7"/>
      <Item label="Orange" value="8"/>
    </Value>
    <Value genre="config" index="15" instance="1" label="Wakeup report LED" max="8" min="0" size="1" type="list" value="0">
      <Help>
				This setting changes the color of the LED when your TriSensor sends a wakeup report.
			</Help>
      <Item label="Disabled" value="0"/>
      <Item label="Red" value="1"/>
      <Item label="Green" value="2"/>
      <Item label="Blue" value="3"/>
      <Item label="Yellow" value="4"/>
      <Item label="Pink" value="5"/>
      <Item label="Cyan" value="6"/>
      <Item label="Purple" value="7"/>
      <Item label="Orange" value="8"/>
    </Value>
    <Value genre="config" index="20" instance="1" label="Temperature Scale Setting" max="1" min="0" size="1" type="list" value="0">
      <Help>
				Configure temperature sensor scale type, Temperature to report in Celsius or Fahrenheit
			</Help>
      <Item label="Celsius" value="0"/>
      <Item label="Fahrenheit" value="1"/>
    </Value>
    <Value genre="config" index="21" label="Temperature Threshold reporting" max="250" min="0" type="short" units="0.1" value="20">
      <Help>
                Change threshold value for change in temperature to induce an automatic report for temperature sensor.
				Scale is identical setting in Parameter No.20.
				0-> Disable Threshold Report for Temperature Sensor.
				Setting of value 20 can be a change of -2.0 or +2.0 (C or F depending on Parameter No.20) to induce automatic report or setting a value of 2 will be a change of 0.2(C or F).
				Available Settings: 0 to 250.
            </Help>
    </Value>
    <Value genre="config" index="22" label="Light intensity Threshold Value to Report" max="10000" min="0" type="short" units="Lux" value="100">
      <Help>
                Change threshold value for change in lux to induce an automatic report for light sensor.
            </Help>
    </Value>
    <Value genre="config" index="23" label="Temperature Sensor Report Interval" max="32767" min="0" type="short" units="Second" value="3600">
      <Help>
                This parameter is configured the time interval for temperature sensor report.
				This value is larger, the battery life is longer.
				And the temperature value changed is not obvious.
            </Help>
    </Value>
    <Value genre="config" index="24" label="Light Sensor Report Interval" max="32767" min="0" type="short" units="Second" value="3600">
      <Help>
                This parameter is configured the time interval for light sensor report.
				This value is larger, the battery life is longer.
				And the light intensity changed is not obvious.
            </Help>
    </Value>
    <Value genre="config" index="30" label="Temperature Offset Value" type="short" units="0.1" value="0">
      <Help>
                The current measuring temperature value can be add and minus a value by this setting.
				The scale can be decided by Parameter Number 20.
				Temperature Offset Value = [Value] * 0.1(Celsius / Fahrenheit)
				Available Settings: -200 to 200.
            </Help>
    </Value>
    <Value genre="config" index="31" label="Light Intensity Offset Value" type="short" units="Lux" value="0">
      <Help>
                The current measuring light intensity value can be add and minus a value by this setting.
				Available Settings: -1000 to 1000.
            </Help>
    </Value>
    <Value genre="config" index="100" label="Light Sensor Calibrated Coefficient" max="32767" min="0" type="short" units="" value="1024">
      <Help>
                This configuration defines the calibrated scale for ambient light intensity.
				Because the method and position that the sensor mounted and the cover of sensor will bring measurement error, user can get more real light intensity by this parameter setting.
				User should run the steps as blows for calibrating
				1) Set this parameter value to default (Assumes the sensor has been added in a Z- Wave Network).
				2) Place a digital light meter close to sensor and keep the same direction, monitor the light intensity value (Vm) which report to controller and record it.
				The same time user should record the value (Vs) of light meter.
				3) The scale calibration formula: k = Vm / Vs.
				4) The value of k is then multiplied by 1024 and rounded to the nearest whole number.
				5) Set the value getting in 5) to this parameter, calibrate finished.

				For example, Vm = 300, Vs = 2600, then k = 2600 / 300 = 8.6667
					k = 8.6667 * 1024 = 8874.7 => 8875.
					The parameter should be set to 8875.
            </Help>
    </Value>
  </CommandClass>
  <!-- Association Groups -->
  <CommandClass id="133">
    <Associations num_groups="3">
      <Group index="1" label="Lifeline" max_associations="1"/>
      <Group index="2" label="BasicSet report" max_associations="5"/>
      <Group index="3" label="Temperature Alarm report" max_associations="5"/>
    </Associations>
  </CommandClass>
</Product>