etckeeper/openzwave/aeotec/zw089.xml

<!-- Aeon Labs Recessed Door Sensor --><Product Revision="6" xmlns="https://github.com/OpenZWave/open-zwave">
  <MetaData>
    <MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/0086:0059:0102</MetaDataItem>
    <MetaDataItem name="ProductPic">images/aeotec/zw089.png</MetaDataItem>
    <MetaDataItem id="0059" name="ZWProductPage" type="0102">https://products.z-wavealliance.org/products/1179/</MetaDataItem>
    <MetaDataItem name="Name">Recessed Door Sensor Gen5 </MetaDataItem>
    <MetaDataItem name="WakeupDescription">Press and hold the Z-Wave button for 5 seconds will trigger sending the Wake up notification command and then keep waking up for 10 seconds after release the Z-Wave button.</MetaDataItem>
    <MetaDataItem name="ProductManual">https://Products.Z-WaveAlliance.org/ProductManual/File?folder=&amp;filename=Manuals/1184/Recessed Door Sensor Gen5 - Manual MCert.pdf</MetaDataItem>
    <MetaDataItem name="InclusionDescription">Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Z-Wave button that you can find in the back of the product.</MetaDataItem>
    <MetaDataItem id="0059" name="FrequencyName" type="0102">U.S. / Canada / Mexico</MetaDataItem>
    <MetaDataItem id="0059" name="Identifier" type="0102">ZW089-A</MetaDataItem>
    <MetaDataItem name="ResetDescription">Press and hold the Z-Wave button that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable.</MetaDataItem>
    <MetaDataItem name="ExclusionDescription">Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Z-Wave button that you can find in back of the product.</MetaDataItem>
    <MetaDataItem name="Description">The Aeotec by Aeon Labs Recessed Door Sensor Gen5 is a door sensor that can detect the state of the door's open/close. It will report the door state to your controller/ gateway/associated nodes in real time when the state of your door has a change. 
It’s a security Z-Wave device that supports security encryption. Also it supports the “Over the Air Firmware Updating” that allows you wirelessly update its firmware if needs. 
It can be included and operated in any Z-Wave network with other Z-Wave certified devices from manufacturers and/or other applications.
</MetaDataItem>
    <ChangeLog>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="08 May 2019" revision="4">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1179/xml</Entry>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="08 May 2019" revision="5">Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1183/xml</Entry>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="08 May 2019" revision="6">Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1184/xml</Entry>
    </ChangeLog>
    <MetaDataItem id="0059" name="ZWProductPage" type="0202">https://products.z-wavealliance.org/products/1183/</MetaDataItem>
    <MetaDataItem id="0059" name="FrequencyName" type="0202">Australia / New Zealand</MetaDataItem>
    <MetaDataItem id="0059" name="Identifier" type="0202">ZW089-B</MetaDataItem>
    <MetaDataItem id="0059" name="ZWProductPage" type="0002">https://products.z-wavealliance.org/products/1184/</MetaDataItem>
    <MetaDataItem id="0059" name="FrequencyName" type="0002">CEPT (Europe)</MetaDataItem>
    <MetaDataItem id="0059" name="Identifier" type="0002">ZW089-C</MetaDataItem>
  </MetaData>
  <!-- Configuration -->
    <!-- Alarm CC isn't supported on this device -->
  <CommandClass action="remove" id="113"/>
  <CommandClass id="112">
    <Value genre="config" index="1" instance="1" label="Sensor Binary Report Toggle" max="1" min="0" size="1" type="list" value="0">
      <Help>Which value of the Sensor Binary Report will be sent when 
            the magnet switch to open/close.</Help>
      <Item label="Normal" value="0"/>
      <Item label="Inverse" value="1"/>
    </Value>
    <Value genre="config" index="3" instance="1" label="Basic Set Toggle" max="1" min="0" size="1" type="list" value="0">
      <Help>Which value of the Basic Set will be sent when the magnet 
            switch to open/close.
            </Help>
      <Item label="Normal" value="0"/>
      <Item label="Inverse" value="1"/>
    </Value>
    <Value genre="config" index="101" instance="1" label="Low Battery Check Enable" max="1" min="0" size="1" type="list" value="0">
      <Help>Enable/disable the function of low battery checking, when 
            the current voltage is less than the warning voltage, it will 
            send the Battery Low Warning Report. 
            </Help>
      <Item label="Disabled" value="0"/>
      <Item label="Enabled" value="1"/>
    </Value>
    <Value genre="config" index="111" instance="1" label="Low Battery Check Interval" max="4294967295" min="0" type="int" value="86640">
      <Help>This parameter is available when the low battery checking
                  function is activated or the device was waked up by other
                  actions (i.e. the z-wave button trigger, magnet switch
                  trigger and the Wake Up Interval Set timeout trigger).
                  The Recessed Door Sensor will check the battery power
                  when it was wake up as other ways. For example: the
                  z-wave button trigger, magnet switch trigger and the
                  Wake Up Interval Set timeout trigger.
              Default setting: 86640
            </Help>
    </Value>
    <Value genre="config" index="121" instance="1" label="Report Type" size="4" type="list" value="256">
      <Help>Configure which sensor report will be sent when the sensor is Opened/Closed</Help>
      <Item label="Disabled" value="0"/>
      <Item label="Basic Set" value="256"/>
      <Item label="Sensor Binary Report" value="16"/>
      <Item label="Basic Set and Sensor Binary Report" value="272"/>
    </Value>
    <Value genre="config" index="252" label="Lock/Unlock Configuration" max="1" min="0" size="1" type="list" value="0">
      <Help>Lock/ unlock all configuration parameters</Help>
      <Item label="Unlock" value="0"/>
      <Item label="Lock" value="1"/>
    </Value>
    <Value genre="config" index="254" label="Device Tag" max="65535" min="0" type="short" units="" value="0">
      <Help>Device Tag</Help>
    </Value>
    <Value genre="config" index="255" label="Reset To Factory Defaults" type="button" value="0" write_only="true">
      <Help>Reset to factory defaults.</Help>
    </Value>
  </CommandClass>
  <!-- Basic set as report-->
  <CommandClass id="32">
    <Compatibility>
      <SetAsReport>true</SetAsReport>
    </Compatibility>
  </CommandClass>
  <!-- Association Groups -->
  <CommandClass id="133">
    <Associations num_groups="2">
      <Group index="1" label="LifeLine" max_associations="5"/>
      <Group auto="true" index="2" label="Battery" max_associations="5"/>
    </Associations>
  </CommandClass>
</Product>