diff --git a/.etckeeper b/.etckeeper
index 5e337d33..e8ae7b24 100755
--- a/.etckeeper
+++ b/.etckeeper
@@ -1,6 +1,7 @@
 # Generated by etckeeper.  Do not edit.
 
 mkdir -p './X11/xkb'
+mkdir -p './X11/xorg.conf.d'
 mkdir -p './apt/auth.conf.d'
 mkdir -p './apt/listchanges.conf.d'
 mkdir -p './apt/preferences.d'
@@ -31,6 +32,7 @@ mkdir -p './polkit-1/localauthority/20-org.d'
 mkdir -p './polkit-1/localauthority/30-site.d'
 mkdir -p './polkit-1/localauthority/50-local.d'
 mkdir -p './polkit-1/localauthority/90-mandatory.d'
+mkdir -p './pulse/client.conf.d'
 mkdir -p './rsyslog.d'
 mkdir -p './security/limits.d'
 mkdir -p './security/namespace.d'
@@ -40,6 +42,9 @@ mkdir -p './ssl/private'
 mkdir -p './triggerhappy/triggers.d'
 mkdir -p './udev/hwdb.d'
 mkdir -p './usb_modeswitch.d'
+mkdir -p './vulkan/explicit_layer.d'
+mkdir -p './vulkan/icd.d'
+mkdir -p './vulkan/implicit_layer.d'
 maybe chmod 0755 '.'
 maybe chmod 0700 '.etckeeper'
 maybe chmod 0644 '.fstab'
@@ -69,6 +74,7 @@ maybe chmod 0644 'X11/Xresources/x11-common'
 maybe chmod 0755 'X11/Xsession'
 maybe chmod 0755 'X11/Xsession.d'
 maybe chmod 0644 'X11/Xsession.d/20dbus_xdg-runtime'
+maybe chmod 0644 'X11/Xsession.d/20vdpau-va-gl'
 maybe chmod 0644 'X11/Xsession.d/20x11-common_process-args'
 maybe chmod 0644 'X11/Xsession.d/30x11-common_xresources'
 maybe chmod 0644 'X11/Xsession.d/35x11-common_xhost-local'
@@ -81,6 +87,7 @@ maybe chmod 0644 'X11/Xsession.d/99x11-common_start'
 maybe chmod 0644 'X11/Xsession.options'
 maybe chmod 0644 'X11/rgb.txt'
 maybe chmod 0755 'X11/xkb'
+maybe chmod 0755 'X11/xorg.conf.d'
 maybe chmod 0644 'adduser.conf'
 maybe chmod 0755 'alternatives'
 maybe chmod 0644 'alternatives/README'
@@ -511,6 +518,8 @@ maybe chmod 0644 'network/interfaces.new'
 maybe chmod 0644 'networks'
 maybe chmod 0755 'nftables.conf'
 maybe chmod 0644 'nsswitch.conf'
+maybe chmod 0755 'openal'
+maybe chmod 0644 'openal/alsoft.conf'
 maybe chmod 0755 'opt'
 maybe chmod 0644 'pam.conf'
 maybe chmod 0755 'pam.d'
@@ -565,6 +574,9 @@ maybe chmod 0644 'profile.d/bash_completion.sh'
 maybe chmod 0644 'profile.d/sshpwd.sh'
 maybe chmod 0644 'profile.d/wifi-check.sh'
 maybe chmod 0644 'protocols'
+maybe chmod 0755 'pulse'
+maybe chmod 0644 'pulse/client.conf'
+maybe chmod 0755 'pulse/client.conf.d'
 maybe chmod 0755 'python3'
 maybe chmod 0755 'python3.9'
 maybe chmod 0644 'python3.9/sitecustomize.py'
@@ -734,9 +746,14 @@ maybe chmod 0755 'update-motd.d'
 maybe chmod 0755 'update-motd.d/00-motd'
 maybe chmod 0644 'usb_modeswitch.conf'
 maybe chmod 0755 'usb_modeswitch.d'
+maybe chmod 0644 'vdpau_wrapper.cfg'
 maybe chmod 0755 'vim'
 maybe chmod 0644 'vim/vimrc'
 maybe chmod 0644 'vim/vimrc.tiny'
+maybe chmod 0755 'vulkan'
+maybe chmod 0755 'vulkan/explicit_layer.d'
+maybe chmod 0755 'vulkan/icd.d'
+maybe chmod 0755 'vulkan/implicit_layer.d'
 maybe chmod 0644 'wgetrc'
 maybe chmod 0755 'wpa_supplicant'
 maybe chmod 0755 'wpa_supplicant/action_wpa.sh'
diff --git a/X11/Xsession.d/20vdpau-va-gl b/X11/Xsession.d/20vdpau-va-gl
new file mode 100644
index 00000000..8e43d4eb
--- /dev/null
+++ b/X11/Xsession.d/20vdpau-va-gl
@@ -0,0 +1,6 @@
+# To enable the use of libvdpau-va-gl as the default VDPAU driver,
+# uncommont the following lines. See
+# `/usr/share/doc/libvdpau-va-gl1/README.Debian` for more details.
+
+# [ ! -f /usr/lib/$(arch)-$(uname -s | tr '[A-Z]' '[a-z]')-gnu/vdpau/libvdpau_va_gl.so.1 ] || \
+#   export VDPAU_DRIVER=va_gl
diff --git a/alternatives/libblas.so.3-aarch64-linux-gnu b/alternatives/libblas.so.3-aarch64-linux-gnu
new file mode 120000
index 00000000..17fc293e
--- /dev/null
+++ b/alternatives/libblas.so.3-aarch64-linux-gnu
@@ -0,0 +1 @@
+/usr/lib/aarch64-linux-gnu/blas/libblas.so.3
\ No newline at end of file
diff --git a/alternatives/liblapack.so.3-aarch64-linux-gnu b/alternatives/liblapack.so.3-aarch64-linux-gnu
new file mode 120000
index 00000000..fb86607a
--- /dev/null
+++ b/alternatives/liblapack.so.3-aarch64-linux-gnu
@@ -0,0 +1 @@
+/usr/lib/aarch64-linux-gnu/lapack/liblapack.so.3
\ No newline at end of file
diff --git a/openal/alsoft.conf b/openal/alsoft.conf
new file mode 100644
index 00000000..8061ed1c
--- /dev/null
+++ b/openal/alsoft.conf
@@ -0,0 +1,491 @@
+# OpenAL config file.
+#
+# Option blocks may appear multiple times, and duplicated options will take the
+# last value specified. Environment variables may be specified within option
+# values, and are automatically substituted when the config file is loaded.
+# Environment variable names may only contain alpha-numeric characters (a-z,
+# A-Z, 0-9) and underscores (_), and are prefixed with $. For example,
+# specifying "$HOME/file.ext" would typically result in something like
+# "/home/user/file.ext". To specify an actual "$" character, use "$$".
+#
+# Device-specific values may be specified by including the device name in the
+# block name, with "general" replaced by the device name. That is, general
+# options for the device "Name of Device" would be in the [Name of Device]
+# block, while ALSA options would be in the [alsa/Name of Device] block.
+# Options marked as "(global)" are not influenced by the device.
+#
+# The system-wide settings can be put in /etc/openal/alsoft.conf and user-
+# specific override settings in $HOME/.alsoftrc.
+# For Windows, these settings should go into $AppData\alsoft.ini
+#
+# Option and block names are case-senstive. The supplied values are only hints
+# and may not be honored (though generally it'll try to get as close as
+# possible). Note: options that are left unset may default to app- or system-
+# specified values. These are the current available settings:
+
+##
+## General stuff
+##
+[general]
+
+## disable-cpu-exts: (global)
+#  Disables use of specialized methods that use specific CPU intrinsics.
+#  Certain methods may utilize CPU extensions for improved performance, and
+#  this option is useful for preventing some or all of those methods from being
+#  used. The available extensions are: sse, sse2, sse3, sse4.1, and neon.
+#  Specifying 'all' disables use of all such specialized methods.
+#disable-cpu-exts =
+
+## drivers: (global)
+#  Sets the backend driver list order, comma-seperated. Unknown backends and
+#  duplicated names are ignored. Unlisted backends won't be considered for use
+#  unless the list is ended with a comma (e.g. 'oss,' will try OSS first before
+#  other backends, while 'oss' will try OSS only). Backends prepended with -
+#  won't be considered for use (e.g. '-oss,' will try all available backends
+#  except OSS). An empty list means to try all backends.
+#drivers =
+
+## channels:
+#  Sets the output channel configuration. If left unspecified, one will try to
+#  be detected from the system, and defaulting to stereo. The available values
+#  are: mono, stereo, quad, surround51, surround51rear, surround61, surround71,
+#  ambi1, ambi2, ambi3. Note that the ambi* configurations provide ambisonic
+#  channels of the given order (using ACN ordering and SN3D normalization by
+#  default), which need to be decoded to play correctly on speakers.
+#channels =
+
+## sample-type:
+#  Sets the output sample type. Currently, all mixing is done with 32-bit float
+#  and converted to the output sample type as needed. Available values are:
+#  int8    - signed 8-bit int
+#  uint8   - unsigned 8-bit int
+#  int16   - signed 16-bit int
+#  uint16  - unsigned 16-bit int
+#  int32   - signed 32-bit int
+#  uint32  - unsigned 32-bit int
+#  float32 - 32-bit float
+#sample-type = float32
+
+## frequency:
+#  Sets the output frequency. If left unspecified it will try to detect a
+#  default from the system, otherwise it will default to 44100.
+#frequency =
+
+## period_size:
+#  Sets the update period size, in frames. This is the number of frames needed
+#  for each mixing update. Acceptable values range between 64 and 8192.
+#period_size = 1024
+
+## periods:
+#  Sets the number of update periods. Higher values create a larger mix ahead,
+#  which helps protect against skips when the CPU is under load, but increases
+#  the delay between a sound getting mixed and being heard. Acceptable values
+#  range between 2 and 16.
+#periods = 3
+
+## stereo-mode:
+#  Specifies if stereo output is treated as being headphones or speakers. With
+#  headphones, HRTF or crossfeed filters may be used for better audio quality.
+#  Valid settings are auto, speakers, and headphones.
+#stereo-mode = auto
+
+## stereo-encoding:
+#  Specifies the encoding method for non-HRTF stereo output. 'panpot' (default)
+#  uses standard amplitude panning (aka pair-wise, stereo pair, etc) between
+#  -30 and +30 degrees, while 'uhj' creates stereo-compatible two-channel UHJ
+#  output, which encodes some surround sound information into stereo output
+#  that can be decoded with a surround sound receiver. If crossfeed filters are
+#  used, UHJ is disabled.
+#stereo-encoding = panpot
+
+## ambi-format:
+#  Specifies the channel order and normalization for the "ambi*" set of channel
+#  configurations. Valid settings are: fuma, acn+sn3d, acn+n3d
+#ambi-format = acn+sn3d
+
+## hrtf:
+#  Controls HRTF processing. These filters provide better spatialization of
+#  sounds while using headphones, but do require a bit more CPU power. The
+#  default filters will only work with 44100hz or 48000hz stereo output. While
+#  HRTF is used, the cf_level option is ignored. Setting this to auto (default)
+#  will allow HRTF to be used when headphones are detected or the app requests
+#  it, while setting true or false will forcefully enable or disable HRTF
+#  respectively.
+#hrtf = auto
+
+## default-hrtf:
+#  Specifies the default HRTF to use. When multiple HRTFs are available, this
+#  determines the preferred one to use if none are specifically requested. Note
+#  that this is the enumerated HRTF name, not necessarily the filename.
+#default-hrtf =
+
+## hrtf-paths:
+#  Specifies a comma-separated list of paths containing HRTF data sets. The
+#  format of the files are described in docs/hrtf.txt. The files within the
+#  directories must have the .mhr file extension to be recognized. By default,
+#  OS-dependent data paths will be used. They will also be used if the list
+#  ends with a comma. On Windows this is:
+#  $AppData\openal\hrtf
+#  And on other systems, it's (in order):
+#  $XDG_DATA_HOME/openal/hrtf  (defaults to $HOME/.local/share/openal/hrtf)
+#  $XDG_DATA_DIRS/openal/hrtf  (defaults to /usr/local/share/openal/hrtf and
+#                               /usr/share/openal/hrtf)
+#hrtf-paths =
+
+## cf_level:
+#  Sets the crossfeed level for stereo output. Valid values are:
+#  0 - No crossfeed
+#  1 - Low crossfeed
+#  2 - Middle crossfeed
+#  3 - High crossfeed (virtual speakers are closer to itself)
+#  4 - Low easy crossfeed
+#  5 - Middle easy crossfeed
+#  6 - High easy crossfeed
+#  Users of headphones may want to try various settings. Has no effect on non-
+#  stereo modes.
+#cf_level = 0
+
+## resampler: (global)
+#  Selects the resampler used when mixing sources. Valid values are:
+#  point - nearest sample, no interpolation
+#  linear - extrapolates samples using a linear slope between samples
+#  cubic - extrapolates samples using a Catmull-Rom spline
+#  bsinc12 - extrapolates samples using a band-limited Sinc filter (varying
+#            between 12 and 24 points, with anti-aliasing)
+#  bsinc24 - extrapolates samples using a band-limited Sinc filter (varying
+#            between 24 and 48 points, with anti-aliasing)
+#resampler = linear
+
+## rt-prio: (global)
+#  Sets real-time priority for the mixing thread. Not all drivers may use this
+#  (eg. PortAudio) as they already control the priority of the mixing thread.
+#  0 and negative values will disable it. Note that this may constitute a
+#  security risk since a real-time priority thread can indefinitely block
+#  normal-priority threads if it fails to wait. As such, the default is
+#  disabled.
+#rt-prio = 0
+
+## sources:
+#  Sets the maximum number of allocatable sources. Lower values may help for
+#  systems with apps that try to play more sounds than the CPU can handle.
+#sources = 256
+
+## slots:
+#  Sets the maximum number of Auxiliary Effect Slots an app can create. A slot
+#  can use a non-negligible amount of CPU time if an effect is set on it even
+#  if no sources are feeding it, so this may help when apps use more than the
+#  system can handle.
+#slots = 64
+
+## sends:
+#  Limits the number of auxiliary sends allowed per source. Setting this higher
+#  than the default has no effect.
+#sends = 16
+
+## front-stablizer:
+#  Applies filters to "stablize" front sound imaging. A psychoacoustic method
+#  is used to generate a front-center channel signal from the front-left and
+#  front-right channels, improving the front response by reducing the combing
+#  artifacts and phase errors. Consequently, it will only work with channel
+#  configurations that include front-left, front-right, and front-center.
+#front-stablizer = false
+
+## output-limiter:
+#  Applies a gain limiter on the final mixed output. This reduces the volume
+#  when the output samples would otherwise clamp, avoiding excessive clipping
+#  noise.
+#output-limiter = true
+
+## dither:
+#  Applies dithering on the final mix, for 8- and 16-bit output by default.
+#  This replaces the distortion created by nearest-value quantization with low-
+#  level whitenoise.
+#dither = true
+
+## dither-depth:
+#  Quantization bit-depth for dithered output. A value of 0 (or less) will
+#  match the output sample depth. For int32, uint32, and float32 output, 0 will
+#  disable dithering because they're at or beyond the rendered precision. The
+#  maximum dither depth is 24.
+#dither-depth = 0
+
+## volume-adjust:
+#  A global volume adjustment for source output, expressed in decibels. The
+#  value is logarithmic, so +6 will be a scale of (approximately) 2x, +12 will
+#  be a scale of 4x, etc. Similarly, -6 will be x1/2, and -12 is about x1/4. A
+#  value of 0 means no change.
+#volume-adjust = 0
+
+## excludefx: (global)
+#  Sets which effects to exclude, preventing apps from using them. This can
+#  help for apps that try to use effects which are too CPU intensive for the
+#  system to handle. Available effects are: eaxreverb,reverb,autowah,chorus,
+#  compressor,distortion,echo,equalizer,flanger,modulator,dedicated,pshifter,
+#  fshifter
+#excludefx =
+
+## default-reverb: (global)
+#  A reverb preset that applies by default to all sources on send 0
+#  (applications that set their own slots on send 0 will override this).
+#  Available presets are: None, Generic, PaddedCell, Room, Bathroom,
+#  Livingroom, Stoneroom, Auditorium, ConcertHall, Cave, Arena, Hangar,
+#  CarpetedHallway, Hallway, StoneCorridor, Alley, Forest, City, Moutains,
+#  Quarry, Plain, ParkingLot, SewerPipe, Underwater, Drugged, Dizzy, Psychotic.
+#default-reverb =
+
+## trap-alc-error: (global)
+#  Generates a SIGTRAP signal when an ALC device error is generated, on systems
+#  that support it. This helps when debugging, while trying to find the cause
+#  of a device error. On Windows, a breakpoint exception is generated.
+#trap-alc-error = false
+
+## trap-al-error: (global)
+#  Generates a SIGTRAP signal when an AL context error is generated, on systems
+#  that support it. This helps when debugging, while trying to find the cause
+#  of a context error. On Windows, a breakpoint exception is generated.
+#trap-al-error = false
+
+##
+## Ambisonic decoder stuff
+##
+[decoder]
+
+## hq-mode:
+#  Enables a high-quality ambisonic decoder. This mode is capable of frequency-
+#  dependent processing, creating a better reproduction of 3D sound rendering
+#  over surround sound speakers. Enabling this also requires specifying decoder
+#  configuration files for the appropriate speaker configuration you intend to
+#  use (see the quad, surround51, etc options below). Currently, up to third-
+#  order decoding is supported.
+hq-mode = false
+
+## distance-comp:
+#  Enables compensation for the speakers' relative distances to the listener.
+#  This applies the necessary delays and attenuation to make the speakers
+#  behave as though they are all equidistant, which is important for proper
+#  playback of 3D sound rendering. Requires the proper distances to be
+#  specified in the decoder configuration file.
+distance-comp = true
+
+## nfc:
+#  Enables near-field control filters. This simulates and compensates for low-
+#  frequency effects caused by the curvature of nearby sound-waves, which
+#  creates a more realistic perception of sound distance. Note that the effect
+#  may be stronger or weaker than intended if the application doesn't use or
+#  specify an appropriate unit scale, or if incorrect speaker distances are set
+#  in the decoder configuration file. Requires hq-mode to be enabled.
+nfc = true
+
+## nfc-ref-delay
+#  Specifies the reference delay value for ambisonic output. When channels is
+#  set to one of the ambi* formats, this option enables NFC-HOA output with the
+#  specified Reference Delay parameter. The specified value can then be shared
+#  with an appropriate NFC-HOA decoder to reproduce correct near-field effects.
+#  Keep in mind that despite being designed for higher-order ambisonics, this
+#  applies to first-order output all the same. When left unset, normal output
+#  is created with no near-field simulation.
+nfc-ref-delay =
+
+## quad:
+#  Decoder configuration file for Quadraphonic channel output. See
+#  docs/ambdec.txt for a description of the file format.
+quad =
+
+## surround51:
+#  Decoder configuration file for 5.1 Surround (Side and Rear) channel output.
+#  See docs/ambdec.txt for a description of the file format.
+surround51 =
+
+## surround61:
+#  Decoder configuration file for 6.1 Surround channel output. See
+#  docs/ambdec.txt for a description of the file format.
+surround61 =
+
+## surround71:
+#  Decoder configuration file for 7.1 Surround channel output. See
+#  docs/ambdec.txt for a description of the file format. Note: This can be used
+#  to enable 3D7.1 with the appropriate configuration and speaker placement,
+#  see docs/3D7.1.txt.
+surround71 =
+
+##
+## Reverb effect stuff (includes EAX reverb)
+##
+[reverb]
+
+## boost: (global)
+#  A global amplification for reverb output, expressed in decibels. The value
+#  is logarithmic, so +6 will be a scale of (approximately) 2x, +12 will be a
+#  scale of 4x, etc. Similarly, -6 will be about half, and -12 about 1/4th. A
+#  value of 0 means no change.
+#boost = 0
+
+##
+## PulseAudio backend stuff
+##
+[pulse]
+
+## spawn-server: (global)
+#  Attempts to autospawn a PulseAudio server whenever needed (initializing the
+#  backend, enumerating devices, etc). Setting autospawn to false in Pulse's
+#  client.conf will still prevent autospawning even if this is set to true.
+#spawn-server = true
+
+## allow-moves: (global)
+#  Allows PulseAudio to move active streams to different devices. Note that the
+#  device specifier (seen by applications) will not be updated when this
+#  occurs, and neither will the AL device configuration (sample rate, format,
+#  etc).
+#allow-moves = false
+
+## fix-rate:
+#  Specifies whether to match the playback stream's sample rate to the device's
+#  sample rate. Enabling this forces OpenAL Soft to mix sources and effects
+#  directly to the actual output rate, avoiding a second resample pass by the
+#  PulseAudio server.
+#fix-rate = false
+
+##
+## ALSA backend stuff
+##
+[alsa]
+
+## device: (global)
+#  Sets the device name for the default playback device.
+#device = default
+
+## device-prefix: (global)
+#  Sets the prefix used by the discovered (non-default) playback devices. This
+#  will be appended with "CARD=c,DEV=d", where c is the card id and d is the
+#  device index for the requested device name.
+#device-prefix = plughw:
+
+## device-prefix-*: (global)
+#  Card- and device-specific prefixes may be used to override the device-prefix
+#  option. The option may specify the card id (eg, device-prefix-NVidia), or
+#  the card id and device index (eg, device-prefix-NVidia-0). The card id is
+#  case-sensitive.
+#device-prefix- =
+
+## capture: (global)
+#  Sets the device name for the default capture device.
+#capture = default
+
+## capture-prefix: (global)
+#  Sets the prefix used by the discovered (non-default) capture devices. This
+#  will be appended with "CARD=c,DEV=d", where c is the card id and d is the
+#  device number for the requested device name.
+#capture-prefix = plughw:
+
+## capture-prefix-*: (global)
+#  Card- and device-specific prefixes may be used to override the
+#  capture-prefix option. The option may specify the card id (eg,
+#  capture-prefix-NVidia), or the card id and device index (eg,
+#  capture-prefix-NVidia-0). The card id is case-sensitive.
+#capture-prefix- =
+
+## mmap:
+#  Sets whether to try using mmap mode (helps reduce latencies and CPU
+#  consumption). If mmap isn't available, it will automatically fall back to
+#  non-mmap mode. True, yes, on, and non-0 values will attempt to use mmap. 0
+#  and anything else will force mmap off.
+#mmap = true
+
+## allow-resampler:
+#  Specifies whether to allow ALSA's built-in resampler. Enabling this will
+#  allow the playback device to be set to a different sample rate than the
+#  actual output, causing ALSA to apply its own resampling pass after OpenAL
+#  Soft resamples and mixes the sources and effects for output.
+#allow-resampler = false
+
+##
+## OSS backend stuff
+##
+[oss]
+
+## device: (global)
+#  Sets the device name for OSS output.
+#device = /dev/dsp
+
+## capture: (global)
+#  Sets the device name for OSS capture.
+#capture = /dev/dsp
+
+##
+## Solaris backend stuff
+##
+[solaris]
+
+## device: (global)
+#  Sets the device name for Solaris output.
+#device = /dev/audio
+
+##
+## QSA backend stuff
+##
+[qsa]
+
+##
+## JACK backend stuff
+##
+[jack]
+
+## spawn-server: (global)
+#  Attempts to autospawn a JACK server whenever needed (initializing the
+#  backend, opening devices, etc).
+#spawn-server = false
+
+## buffer-size:
+#  Sets the update buffer size, in samples, that the backend will keep buffered
+#  to handle the server's real-time processing requests. This value must be a
+#  power of 2, or else it will be rounded up to the next power of 2. If it is
+#  less than JACK's buffer update size, it will be clamped. This option may
+#  be useful in case the server's update size is too small and doesn't give the
+#  mixer time to keep enough audio available for the processing requests.
+#buffer-size = 0
+
+##
+## WASAPI backend stuff
+##
+[wasapi]
+
+##
+## DirectSound backend stuff
+##
+[dsound]
+
+##
+## Windows Multimedia backend stuff
+##
+[winmm]
+
+##
+## PortAudio backend stuff
+##
+[port]
+
+## device: (global)
+#  Sets the device index for output. Negative values will use the default as
+#  given by PortAudio itself.
+#device = -1
+
+## capture: (global)
+#  Sets the device index for capture. Negative values will use the default as
+#  given by PortAudio itself.
+#capture = -1
+
+##
+## Wave File Writer stuff
+##
+[wave]
+
+## file: (global)
+#  Sets the filename of the wave file to write to. An empty name prevents the
+#  backend from opening, even when explicitly requested.
+#  THIS WILL OVERWRITE EXISTING FILES WITHOUT QUESTION!
+#file =
+
+## bformat: (global)
+#  Creates AMB format files using first-order ambisonics instead of a standard
+#  single- or multi-channel .wav file.
+#bformat = false
diff --git a/pulse/client.conf b/pulse/client.conf
new file mode 100644
index 00000000..7a428f7e
--- /dev/null
+++ b/pulse/client.conf
@@ -0,0 +1,35 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
+## more information. Default values are commented out.  Use either ; or # for
+## commenting.
+
+; default-sink =
+; default-source =
+; default-server =
+; default-dbus-server =
+
+; autospawn = yes
+; daemon-binary = /usr/bin/pulseaudio
+; extra-arguments = --log-target=syslog
+
+; cookie-file =
+
+; enable-shm = yes
+; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
+
+; auto-connect-localhost = no
+; auto-connect-display = no
diff --git a/vdpau_wrapper.cfg b/vdpau_wrapper.cfg
new file mode 100644
index 00000000..21d5b8c0
--- /dev/null
+++ b/vdpau_wrapper.cfg
@@ -0,0 +1,2 @@
+enable_flash_uv_swap=1
+disable_flash_pq_bg_color=1